[Bimmerprid3]

Can ant member help me to fix my driver side window don t go auto up when I press the switch... This happen when I have my battery changed... Thank You

[.fLip.]

I have the same problem with my rear passenger window. if I roll it completely down, I have to hit the switch a few times to get it go back up...seems like the safety feature is interfering. so to avoid it, I just manually roll it down to the point right before its all the way down and I don't have the issue. sucks but its not important enough for me to worry about right now lol

[roadkillrob]

If your battery was changed, then you need to reset the auto windows.

Initialization comprises:
• Erasure of initialization
• Reinitialization

An initialization must be performed:
• In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible
• After the power window drive has been replaced
• After work is carried out on the power window mechanism
• After a power supply interruption, e.g. disconnection of the battery or disconnection of the power supply to the door
• After the door window glass has been removed and installed or replaced
• After adjustment work on the door window glass
• After adjustment work on the convertible top
• After replacement of seals

Erasure of initialization:
• Open door window glass fully
• Operate power window switch in "Open" position four times within 10 seconds

This erases initialization of the power window, anti-trapping protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive, otherwise repeat procedure.

Reinitialization:
Avoid a break between the two steps!
• Open door window glass fully
• Operate and hold power window switch in "Close" position (second switch stage)
• Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer
• Open door window glass fully
• Operate and hold power window switch in "Close" position (second switch stage)
• Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer

[knobby10]

thank you thank you thank you, no doubt you saved me at least a $100. at the dealership!!