can i put 285/30/19 on 9.5 rim size

E90_boostjunky · 01-10-2013, 03:25 AM

like the title says.. i been doing some research and the BMW e60 m5 wheels are 285/35/19 with the width of 9.5 so i imagine i can throw some 285/30/19s on my 335i. would it rub? would i need to roll my fenders? please let me know!

techwhiz · 01-10-2013, 01:56 PM

You can do 275/30 with the right offset and no fender rolling.
A 285/30 might require a fender roll. It will really depend on the tire brand.
I run 19x8.5 and 19x9.5 with et35 offset on both front and rear.
I run 235/35 front and 275/35 rear. Falken 722.

Red_Bean_Bun · 01-10-2013, 02:14 PM

Maybe a bit wide for a 9.5JJ

E90_boostjunky · 01-10-2013, 03:39 PM

Quote:

Originally Posted by techwhiz

You can do 275/30 with the right offset and no fender rolling.
A 285/30 might require a fender roll. It will really depend on the tire brand.
I run 19x8.5 and 19x9.5 with et35 offset on both front and rear.
I run 235/35 front and 275/35 rear. Falken 722.

I want Michelin ps2 and they don't make 275. And I have 265 right now so the next one is 285, I don't see why it would rub if your running a 275/35 which is a thicker wide wall than 285/30. Notice below how the diameter of yours is higher than what I want, so if your not rubbing than I prolly shouldn't?? or maybe I'm reading the thing wrong?
Name: image.jpg
Views: 8535
Size: 178.3 KB

Name: image.jpg
Views: 8535
Size: 178.3 KB

remmib · 01-10-2013, 03:56 PM

Offset?

E90_boostjunky · 01-10-2013, 05:21 PM

Quote:

Originally Posted by remmib

Offset?

I believe they are 33 for front and 35 for rear. Or they're both 35. I'm really not sure i bought the rims used they're sonic tuning st-160. Thanks

remmib · 01-11-2013, 01:08 PM

ET35 and 285 will probably rub without rolling fenders.

techwhiz · 01-11-2013, 04:11 PM

I said 275/35 but that was a typo.
I run 275/30.

VMRWheels · 01-11-2013, 06:17 PM

Quote:

Originally Posted by remmib

ET35 and 285 will probably rub without rolling fenders.

Remmib is correct. If you want to run the larger 285, look into having your fenders rolled.

Ron1n · 04-02-2013, 09:48 PM

I have an E90 LCI with 295/30's on 19" VB3s with a 33 offset in the rear (I think). Even with fenders rolled, I'm rubbing. Could I go a 285/30 and be ok?

VMRWheels · 04-02-2013, 10:23 PM

285s will help, but we don't recommend those specs.

#Tee · 04-03-2013, 06:05 AM

9.5 + 35 in 285.30 will rub without a roll pending on now low/passengers/hard bumps. totally worth it if you dont mind that.

Prelci e90 with 9.5 +35/285.30 will be ok.

Ron1n · 04-06-2013, 11:27 PM

Quote:

Originally Posted by VMRWheels

285s will help, but we don't recommend those specs.

What would you recommend? I swapped out the 295/30's with 275/30's, and those obviously fit fine, and aren't even stretched.

hnekcivic · 04-11-2013, 08:58 PM

quick question, anyone here know if i could fit 275/30 rear on 19x11' 25 offset without rubbing bad? im on -4.7 camber now , i put on 9.5'' with 7 offset on before and work out well , im on kwv1 pretty low , it's e92 btw

#Tee · 04-11-2013, 09:05 PM

if youre truely on -4.7 275.30 will have very lil rub. with that camber you should be tucking wheel at full compression.

bimmergixxer · 04-14-2013, 02:42 PM

I have the same car as you and was running a 275/30/19 with 10mm spacers and had no rub issues. Went to a 285/30/19 with the spacers on a 9.5" which will fit the rim but is wide in reality and needed a minor fender roll. It looked amazing but a wider rim should be used to optimize handling.

teknic90 · 10-23-2013, 03:20 PM

Quote:

Originally Posted by #Tee

9.5 + 35 in 285.30 will rub without a roll pending on now low/passengers/hard bumps. totally worth it if you dont mind that.

Prelci e90 with 9.5 +35/285.30 will be ok.

Let me see if I understand the math here.
I am running a pre-lci 335i sedan with 19x10 +37 linea corse LC818's and currently have 275/30/R19. So your saying I could run 285/20/R19 (falken 453) with no rub?

bmw325i · 10-23-2013, 04:37 PM

Quote:

Originally Posted by teknic90

Let me see if I understand the math here.
I am running a pre-lci 335i sedan with 19x10 +37 linea corse LC818's and currently have 275/30/R19. So your saying I could run 285/20/R19 (falken 453) with no rub?

You'd probably be alright falkens run narrow and the wider wheels will keep the tire from bulging out so much compared to a 9.5.

teknic90 · 10-23-2013, 04:45 PM

Quote:

Originally Posted by bmw325i

You'd probably be alright falkens run narrow and the wider wheels will keep the tire from bulging out so much compared to a 9.5.

Cool. Well I guess I should be ok in the front too? I have 235/35/R19 now on 19x8.5 rims +30 so theroretically 245/35/R19 will be a match to the rear 285/30/R19. I guess there is only one way to find out. lol

#Tee · 10-23-2013, 10:50 PM

you got it

01-10-2013, 03:25 AM	#1
E90_boostjunky Lieutenant Colonel 101 Rep 1,644 Posts Drives: BMW 335I E90 SGM Join Date: Dec 2011 Location: USA, IL iTrader: (1)	can i put 285/30/19 on 9.5 rim size like the title says.. i been doing some research and the BMW e60 m5 wheels are 285/35/19 with the width of 9.5 so i imagine i can throw some 285/30/19s on my 335i. would it rub? would i need to roll my fenders? please let me know!
	Appreciate 0 Tweet Quote

01-10-2013, 01:56 PM	#2
techwhiz Colonel 455 Rep 2,972 Posts Drives: e90 335i Sedan - Arctic Join Date: Feb 2012 Location: Bay Area, Ca iTrader: (4)	You can do 275/30 with the right offset and no fender rolling. A 285/30 might require a fender roll. It will really depend on the tire brand. I run 19x8.5 and 19x9.5 with et35 offset on both front and rear. I run 235/35 front and 275/35 rear. Falken 722.
	Appreciate 0 Quote

01-10-2013, 02:14 PM	#3
Red_Bean_Bun Captain 63 Rep 944 Posts Drives: E92 Join Date: Nov 2009 Location: Montreal iTrader: (4)	Maybe a bit wide for a 9.5JJ
	Appreciate 0 Quote

01-10-2013, 03:56 PM	#5
remmib General 1596 Rep 29,217 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Offset? __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

01-11-2013, 01:08 PM	#7
remmib General 1596 Rep 29,217 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	ET35 and 285 will probably rub without rolling fenders. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

01-11-2013, 04:11 PM	#8
techwhiz Colonel 455 Rep 2,972 Posts Drives: e90 335i Sedan - Arctic Join Date: Feb 2012 Location: Bay Area, Ca iTrader: (4)	I said 275/35 but that was a typo. I run 275/30.
	Appreciate 0 Quote

04-02-2013, 09:48 PM	#10
Ron1n Speed Demon 222 Rep 3,690 Posts Drives: 2021 M5C Join Date: Oct 2009 Location: Irvine iTrader: (6) Garage List 2021 M5 Competition [0.00] 2016 BMW 550i [0.00] 2011 335is [0.00] 2009 E93 M3 [10.00] 2010 335d [9.50]	I have an E90 LCI with 295/30's on 19" VB3s with a 33 offset in the rear (I think). Even with fenders rolled, I'm rubbing. Could I go a 285/30 and be ok? __________________ Current: '21 M5C, '15 X6 50i Previous: '18 M550i, '16 550i, '11 335is, '09 E93 M3 DCT, '10 E90 335d, '07 E90 328i
	Appreciate 0 Quote

04-02-2013, 10:23 PM	#11
VMRWheels BimmerPost Supporting Vendor 2124 Rep 25,972 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	285s will help, but we don't recommend those specs. __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

04-03-2013, 06:05 AM	#12
#Tee Major General 564 Rep 5,365 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	9.5 + 35 in 285.30 will rub without a roll pending on now low/passengers/hard bumps. totally worth it if you dont mind that. Prelci e90 with 9.5 +35/285.30 will be ok. __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote

04-11-2013, 08:58 PM	#14
hnekcivic Private 30 Rep 97 Posts Drives: 2007 328xi Join Date: Sep 2011 Location: kansas city, mo iTrader: (0)	quick question, anyone here know if i could fit 275/30 rear on 19x11' 25 offset without rubbing bad? im on -4.7 camber now , i put on 9.5'' with 7 offset on before and work out well , im on kwv1 pretty low , it's e92 btw
	Appreciate 0 Quote

04-11-2013, 09:05 PM	#15
#Tee Major General 564 Rep 5,365 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	if youre truely on -4.7 275.30 will have very lil rub. with that camber you should be tucking wheel at full compression. __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote

04-14-2013, 02:42 PM	#16
bimmergixxer Railside Performance 54 Rep 340 Posts Drives: E92 M3 R8 V10 Q5 Join Date: Nov 2009 Location: Railside Performance iTrader: (8) Garage List 2010 Ducati Streetf ... [7.00] 2017 Q5 [0.00] 2017 BMW R NineT Racer [5.00] 2010 Audi R8 V10 Ma ... [0.00] 2008 M3 [10.00]	I have the same car as you and was running a 275/30/19 with 10mm spacers and had no rub issues. Went to a 285/30/19 with the spacers on a 9.5" which will fit the rim but is wide in reality and needed a minor fender roll. It looked amazing but a wider rim should be used to optimize handling.
	Appreciate 0 Quote

10-23-2013, 10:50 PM	#20
#Tee Major General 564 Rep 5,365 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	you got it __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote