[pinto]

I have problem with my car these days. Now i have a new problem my procede seems broken, the in dash feature seems completely off:

When i try to show what map i use the map display is correct but the ethanol content indicate 100% (i use the last flexfuel firmware) procede tuning interface give me the right value (60%).



When i use the boost or anything else feature the needle gone completely crazy



And more worried i can't connect to the car, i have BT tool, OFT and INPA and nothing work!

When i pull back the procede i can't start the car, do you have some idea what's happen?

[Jeff@TopGearSolutions]

After you make sure everything is connected correctly with the PROcede under the hood I would re-upload the firmware and maps.

If these are new maps you have tried and are still in BETA I would go back to the last stable firmware and maps.

Be sure to follow the instructions in the read me file.

Let us know what happens after that.

[pinto]

It use to work yesterday, i use the beta since the release. I already try to re-upload everything.

[TurboSid]

are u sure u don't have the gauges set for the wrong car? 135i gauges in a 335i or vice versa?

Try cycling through the gauge options by double tapping the hazard signal button.

[Iceberg3232]

Originally Posted by pinto

I have problem with my car these days. Now i have a new problem my procede seems broken, the in dash feature seems completely off:

When i try to show what map i use the map display is correct but the ethanol content indicate 100% (i use the last flexfuel firmware) procede tuning interface give me the right value (60%).



When i use the boost or anything else feature the needle gone completely crazy



And more worried i can't connect to the car, i have BT tool, OFT and INPA and nothing work!

When i pull back the procede i can't start the car, do you have some idea what's happen?

Had the exact thing happen with my car. I have the flex fuel kit and ethanol was reading 189%. These are certainly still beta maps.