295's too big for 20" by 10.5?

///M_owns_you · 04-26-2007, 02:11 AM

are 295/25/20 too big for a 20" x 10.5 wheel?

wj4 · 04-26-2007, 02:13 AM

20 series, are you series? You're going to bend the wheel in a week tops, man. Since you are lowered as well, I highly think rubbing will be an issue. I think 295 is a bit too big for 10.5, 285 seems more ideal IMO.

///M_owns_you · 04-26-2007, 02:17 AM

Quote:

Originally Posted by wj4

20 series, are you series? You're going to bend the wheel in a week tops, man. Since you are lowered as well, I highly think rubbing will be an issue. I think 295 is a bit too big for 10.5, 285 seems more ideal IMO.

Why do you say i'll bend the wheel? Im pretty sure iForged wheels (or any other forged wheel) dont bend that easily my friend. I had 19'' iforgeds before with 275/30's and hit some SERIOUS pot holes and stuff and no damage what so ever. No i had my fenders rolled so no rubbing

wj4 · 04-26-2007, 02:24 AM

If you look at my sig, I also have iForged. You can have the strongest wheels in the world, but when you have a heavy enough impact, it will give. Your car weights roughly 3600 lb, you do the math.

Have you ridden in a car with 20s before? I've been in an SUV with 26s on 20 series profile, god damn, and I thought my 35 and 30 series tires are bad.

You may have your fenders rolled, but just to let you know, rubbing can occur at more than one spot..

I think 20s is too big and looks tasteless on a 3series, but more power to you if you can pull this off with no issues.

///M_owns_you · 04-26-2007, 02:26 AM

Quote:

Originally Posted by wj4

If you look at my sig, I also have iForged. You can have the strongest wheels in the world, but when you have a heavy enough impact, it will give. Your car weights roughly 3600 lb, you do the math.

Have you ridden in a car with 20s before? I've been on an SUV with 26s on 20 series profile, god damn, and I thought my 35 and 30 series tires are bad.

You may have your fenders rolled, but just to let you know, rubbing can occur at more than one spot..

they'll be 25's not 20, i can get 30's too. Hamann's 335 is on 20's and looks great, for the E90 20's are tasteless but for E92 they look good. Those are both 20's below

Zeiss · 04-26-2007, 02:41 AM

Looks great! Get 20s

borsalino · 04-26-2007, 03:23 AM

20's do look very nice on those cars. Are you also going to get the brembo brake kit to fill in the wheels?

///M_owns_you · 04-26-2007, 04:58 AM

Quote:

Originally Posted by borsalino

20's do look very nice on those cars. Are you also going to get the brembo brake kit to fill in the wheels?

If you buy them for me then sure!!! But no not ANYTIME in the near future, i dont have 6-8k to drop on some brakes and even if i did i think i would have put it towards an E92 M3 or a turbo upgrade kit once they eventually start coming out for the 335 in the future.

j|rz44 · 04-26-2007, 06:04 AM

what kind of finish are you thinking?

///M_owns_you · 04-26-2007, 06:28 AM

Quote:

Originally Posted by jmramos44

what kind of finish are you thinking?

Same as my old iForgeds, flat black but with chrome lips this time, not polished lips. I thought about doing brushed aluminum but something about doing that didnt seem right in my mind. Its too bright for a black car i dunno or maybe its just me, plus they look too much like a chrome wheel, which the absolute last thing i want to look like. So i figured i stay with flat black, i dont like gloss black at all what so ever.

remmib · 04-26-2007, 10:46 AM

Quote:

Originally Posted by ///M_owns_you

are 295/25/20 too big for a 20" x 10.5 wheel?

295/25/20 on 20x 10.5 is a good fit, like technik's 330i

http://www.e90post.com/forums/showth...hlight=technik

ksfrogman · 04-26-2007, 10:56 AM

Quote:

Originally Posted by remmib

295/25/20 on 20x 10.5 is a good fit, like technik's 330i

http://www.e90post.com/forums/showth...hlight=technik

Samir's 330i rear fenders were stretched. That wheel/tire setup would not fit an OEM E90.

remmib · 04-26-2007, 11:26 AM

Quote:

Originally Posted by ksfrogman

Samir's 330i rear fenders were stretched. That wheel/tire setup would not fit an OEM E90.

I meant the tire was a good fit on a 10.5" wheel, not on the car itself

Mikes12985 · 04-26-2007, 05:57 PM

I got 20x10 with 285/25/20 and its rides very nice better feel than stock, im lowering tomorrow....heres a pic

SfValley335i · 04-26-2007, 07:24 PM

take it to a body shop and pull the fenders out then you'll be able to fit whatever you like. (within reason)

Tropicool · 04-26-2007, 08:27 PM

why not run 20X10 in the rear? with 285/25/20 roll fenders and with a 35 offset u be fine mang

///M_owns_you · 04-26-2007, 08:34 PM

Quote:

Originally Posted by cantc0pe

why not run 20X10 in the rear? with 285/25/20 roll fenders and with a 35 offset u be fine mang

The official word is now 20'' by 10.5 essens on 285/25/20's. I just hate those Pirelli's that come in that size tough....such ugly tread. I got my fenders rolled a few months back so i should be fine.

tjnptel1 · 04-27-2007, 05:39 PM

Quote:

Originally Posted by Mikes12985

I got 20x10 with 285/25/20 and its rides very nice better feel than stock...

i HIGHLY doubt that.

Mikes12985 · 04-27-2007, 07:06 PM

Quote:

Originally Posted by tjnptel1

i HIGHLY doubt that.

If you get it done right thats what you get, unlike most of you guys mouting yourself.

.Mike.

cstmx_ryder · 10-08-2007, 02:34 PM

Quote:

Originally Posted by Mikes12985

I got 20x10 with 285/25/20 and its rides very nice better feel than stock, im lowering tomorrow....heres a pic

I like........What are the offsets for front and back? What brand of tires are you running?

04-26-2007, 02:11 AM	#1
///M_owns_you President 58 Rep 316 Posts Drives: 335i coupe Join Date: Mar 2007 Location: Laguna Beach, CA iTrader: (0)	295's too big for 20" by 10.5? are 295/25/20 too big for a 20" x 10.5 wheel? __________________ Black Sapphire 335i coupe/Saddle Brown leather/Aluminum trim-Sport Pkg, Premium Pkg, Navigation, PDC, Paddle shifters,Vishnu PROcede awaits, 20" iForged Essen, H&R springs, Milltek cat-back exhaust,side markers painted, 25% tint, V1 hardwired
	Appreciate 0 Tweet Quote

04-26-2007, 02:13 AM	#2
wj4 Major General 356 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	20 series, are you series? You're going to bend the wheel in a week tops, man. Since you are lowered as well, I highly think rubbing will be an issue. I think 295 is a bit too big for 10.5, 285 seems more ideal IMO.
	Appreciate 0 Quote

04-26-2007, 02:24 AM	#4
wj4 Major General 356 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	If you look at my sig, I also have iForged. You can have the strongest wheels in the world, but when you have a heavy enough impact, it will give. Your car weights roughly 3600 lb, you do the math. Have you ridden in a car with 20s before? I've been in an SUV with 26s on 20 series profile, god damn, and I thought my 35 and 30 series tires are bad. You may have your fenders rolled, but just to let you know, rubbing can occur at more than one spot.. I think 20s is too big and looks tasteless on a 3series, but more power to you if you can pull this off with no issues.
	Appreciate 0 Quote

04-26-2007, 02:41 AM	#6
Zeiss Lieutenant Colonel 348 Rep 1,864 Posts Drives: Bicycle Join Date: Jan 2007 Location: Vancouver iTrader: (0)	Looks great! Get 20s
	Appreciate 0 Quote

04-26-2007, 03:23 AM	#7
borsalino Private First Class 18 Rep 172 Posts Drives: BMW e90 328i Join Date: Oct 2006 Location: Fraser River iTrader: (0)	20's do look very nice on those cars. Are you also going to get the brembo brake kit to fill in the wheels? __________________ e90 328i- Sparkling Graphite/Premium Package/Steptronic/PDC/ Blacklines
	Appreciate 0 Quote

04-26-2007, 06:04 AM	#9
j\|rz44 Lieutenant Colonel 45 Rep 1,683 Posts Drives: 335i\|E92 Join Date: Oct 2006 Location: Lost iTrader: (2) Garage List 07 335i [0.00]	what kind of finish are you thinking? __________________ Life is Good
	Appreciate 0 Quote

04-26-2007, 05:57 PM	#14
Mikes12985 Lieutenant 37 Rep 526 Posts Drives: X3M, 530i, X7 (on order) Join Date: Apr 2007 Location: NY (LI) iTrader: (10)	I got 20x10 with 285/25/20 and its rides very nice better feel than stock, im lowering tomorrow....heres a pic
	Appreciate 0 Quote

04-26-2007, 07:24 PM	#15
SfValley335i Colonel 167 Rep 2,409 Posts Drives: Current:135i Sold:335i sedan Join Date: Mar 2007 Location: City of Angels iTrader: (8)	take it to a body shop and pull the fenders out then you'll be able to fit whatever you like. (within reason)
	Appreciate 0 Quote

04-26-2007, 08:27 PM	#16
Tropicool Major 117 Rep 1,438 Posts Drives: F80 SO M3 Join Date: Apr 2006 Location: Venice Beach iTrader: (0)	why not run 20X10 in the rear? with 285/25/20 roll fenders and with a 35 offset u be fine mang
	Appreciate 0 Quote