[raf555]

Originally Posted by foxy-stoat

Easiest solution would be to buy some heated seats, heated seat buttons, make up your own wiring loom and pay someone to code it once all fitted.

I ended up fitting the looms/buttons/seats etc only to find out that the M Sport seats I bought weren't heated afterall....DOH !!!!

Wiring took a few hours and not that difficult to do.

If the seats have black box towards the front of under the seat they should be heated.

[foxy-stoat]

Hmmmm the wiring for the heated bits werent in the seat loom plugy thing, so I guess they not heated, although I'll have a check!

[reidyboy]

Hi there, I have have fitted the heated seats and switches and had the coding complete but have been told I require the looms as these were not part of the original car order. do you know where I can buy these or if someone can provide and fit these. Thanks

[foxy-stoat]

You need these with the retro fit instructions from BMW :



The wiring on the left is the original.....an ebay seller used to sell the retro fit kit for around £50 but not sure if these are available anymore. If you get the retro fit guide you will be able to make up your own looms, you just need to find out what the connectors are called so you can order them.

Good luck !