[hectic]

I recently flashed my TCU with the Alpina B3 flash and need to get my paddle shifters working. Can anyone share their factory default TRC file for the EGS module for a 2009 E90 335i xdrive with sports package?

Or could I just reflash my transmission back to stock in WinKPF to obtain the factory default EGS module TRC file? Thanks in advance!

[cn555ic]

You dont need a trc file....Just use NCSexpert using the Expertmode profile and code the EGS module to default and your paddle shifters should work after.

[hectic]

When you say I dont need a trc file to code to default, do ypu mean theres a diff procedure? I dont codieren_lesen and sg_codieren? I tried coding in paddles by changing the wert_00 and now I have a malfunction where I can't select a gear.

[rentonrider]

Originally Posted by hectic

When you say I dont need a trc file to code to default, do ypu mean theres a diff procedure? I dont codieren_lesen and sg_codieren? I tried coding in paddles by changing the wert_00 and now I have a malfunction where I can't select a gear.

Clear errors via inpa. Then expert mode like cn says and reset EGS. If problem still exists you have bigger issues.

[hectic]

Fixed! Everything works esp paddles. Thanks for the responses. In case anyone runs into the same issue, what I did was codieren_lesen the EGS module, execute job, and once it completed once it finished, I immediately switched to sg_codieren and execute job. Once finished, everything went back to default as the members above said.

Side note, I feel better now. I was crazy nervous earlier because I couldn't select a gear due to a malfunction warning. It was a result of trying to change "paddles wert_00" to get my paddles working instead of returning the EGS module back to default. Noob.

[cn555ic]

Originally Posted by hectic

Fixed! Everything works esp paddles. Thanks for the responses. In case anyone runs into the same issue, what I did was codieren_lesen the EGS module, execute job, and once it completed once it finished, I immediately switched to sg_codieren and execute job. Once finished, everything went back to default as the members above said.

Side note, I feel better now. I was crazy nervous earlier because I couldn't select a gear due to a malfunction warning. It was a result of trying to change "paddles wert_00" to get my paddles working instead of returning the EGS module back to default. Noob.

Glad u got it working

[notnow]

Omg thank you OP, had my alpina flash for a couple weeks now and just found the time to do the part 2 a couple hours ago and I got the dreaded gear icon. Was freaking out, tried daten 50.2, daten 49.2 and daten 48.1 and none of them worked. Tried different ediabas and ncsexper versions and nothing worked T_T

So I guess the proper steps is what hectic posted:

In case anyone runs into the same issue, what I did was codieren_lesen the EGS module, execute job, and once it completed once it finished, I immediately switched to sg_codieren and execute job. Once finished, everything went back to default as the members above said.

Thank god everything is working now, that gear icon is extremely scary as I couldn't even shift to anything. Car was pretty much dead.

[hectic]

Originally Posted by wonton1017

Omg thank you OP, had my alpina flash for a couple weeks now and just found the time to do the part 2 a couple hours ago and I got the dreaded gear icon. Was freaking out, tried daten 50.2, daten 49.2 and daten 48.1 and none of them worked. Tried different ediabas and ncsexper versions and nothing worked T_T

So I guess the proper steps is what hectic posted:


Thank god everything is working now, that gear icon is extremely scary as I couldn't even shift to anything. Car was pretty much dead.

Yeah it freaked me out. Glad I helped someone out.