[Baqster]

Hi guys, currently have an 06 e90 320d that has had a full lci conversion done apart from the exhaust which is that awful downturned pipe without dpf

Have searched the forums and not really found the answer.
Is possible to get a back box of an lci 320/330 and have it welded on to the existing set up?

Im in the Manchester so any recommendations welcome

Thanks

[Brian mc21]

There is no separate back box as such so it would require cutting the exhausts. Bit more expensive but you could consider a Back box from a company called BCS. This will be the same process as fitting an lci one but will look much better IMO. Expensive enough for nothing more than a visual upgrade as there will be no difference in sound. This is mine.






Hope this helps.

[Icekube]

you could either get a 330D backbox and get an exhaust shop to weld it on.

or you could just go to an exhaust shop and get them to fit a new rear box with your choice of tailpipe

or you could buy that BCS then pay an exhaust shop to fit it.


personally, I bought a full 330D system (100£ used) then paid a garage to make up a de-cat and fit the 330D full system. cost me 200quid for the de-cat and fitting.

[E91-Gaz]

If your existing backbox is okay and its just the tailpipe you want changed then go to your local powerflow and get a new tailpipe welded on would look even better then than an LCi's tailpipe. Price about 50-100 max

You will get more soot up the back of the car though by ditching the downturned tailpipe but it's a small price to pay if you ask me....

HTH

[Baqster]

Thanks for all your help guys, appreciate it.