[tdott]

Hoping someone can help.

I was able to successfully code my 08 M3, M3DSC, KOMBI, CAS, FRM, etc.
This was with NCS 3.0.1 with updated EDIABAS (forgot version).
50.2 Daten Files. Thought I had everything all setup and working well...

Tried to code a friend's 09 335i and got this error:
I was able to read CAS, KOMBI, NFRM, etc, but couldn't write/code it after making changes.
I got the error (see screenshot COAPI-2063 error)


Did some research, thought I needed to fully upgrade to BMW tools 2.12 and NCS 4.0.1, so I did that, loaded new profiles, made sure daten files were updated to 50.2 after the upgrade to 4.0.1

Same error...

Any ideas?
I didn't view the error log at the time thinking it would be saved, but tried to view it now and now its gone. Can anyone help without the error log? or is it needed? I'll have to get my friend to come over again and try it once more and save the error logs this time.

32-bit Windows XP Laptop, clean install, nothing else on it. BMW Coding Tool used to update daten files.

[joepcrepairs2]

Originally Posted by tdott

Hoping someone can help.

I was able to successfully code my 08 M3, M3DSC, KOMBI, CAS, FRM, etc.
This was with NCS 3.0.1 with updated EDIABAS (forgot version).
50.2 Daten Files. Thought I had everything all setup and working well...

Tried to code a friend's 09 335i and got this error:
I was able to read CAS, KOMBI, NFRM, etc, but couldn't write/code it after making changes.
I got the error (see screenshot COAPI-2063 error)


Did some research, thought I needed to fully upgrade to BMW tools 2.12 and NCS 4.0.1, so I did that, loaded new profiles, made sure daten files were updated to 50.2 after the upgrade to 4.0.1

Same error...

Any ideas?
I didn't view the error log at the time thinking it would be saved, but tried to view it now and now its gone. Can anyone help without the error log? or is it needed? I'll have to get my friend to come over again and try it once more and save the error logs this time.

32-bit Windows XP Laptop, clean install, nothing else on it. BMW Coding Tool used to update daten files.

update to ediabas 7.xx

[joepcrepairs2]

Originally Posted by *************

update to ediabas 7.xx

also empty your fsw_psw.man then try to read the module from that car again