[waterbottle1]

As topic stated,

I have read some threads on this bt none were clear enuff...
I tried removing my cf diffuser to try on a new one ... ( was installed by someone else and I can't get it off)

I got all bolts out.
Just having trouble unpluggin the pins/tabs

Do I have to:

A) go under the diffuser and push the tabs out really hard? Upwards /downwards? (They don't budge)
B) just pull bloody hard on the whole diffuser? (As some other thread said to do so , bt I hear cracking noises which can't be good ..lol)
C) take the bumper totally off ....

I'm lost. The dam diffuser pins won't let loose =[
Cheers

This is my current diffuser which I'm trying to take off

[waterbottle1]

These tabs

[#Tee]

i never have any luck popping them out. i end up removing the whole bumper and it was still a pain in the arse. i just didnt want to break any clips...cant sleep at night knowing i broke them

[waterbottle1]

Originally Posted by #Tee

i never have any luck popping them out. i end up removing the whole bumper and it was still a pain in the arse. i just didnt want to break any clips...cant sleep at night knowing i broke them

Lol yeh man. It's so bad!
I think I'll have to take off the bumper if there's no solution

[Route 16]

i believe it's pushing upwards and i use a flathead screw in between the bumper and diffuser tab and push the diffuser out. I do all of this under the car. I get lock jaw from doing this shit.

[Game]

Careful pushing them out with force, especially with a carbon fiber/fiberglass diffuser. I have cracked mine doing so.

[waterbottle1]

Originally Posted by Route 16

i believe it's pushing upwards and i use a flathead screw in between the bumper and diffuser tab and push the diffuser out. I do all of this under the car. I get lock jaw from doing this shit.

So you actually push the tabs from inside the diffuser up?

[waterbottle1]

Originally Posted by Game

Careful pushing them out with force, especially with a carbon fiber/fiberglass diffuser. I have cracked mine doing so.

Yeh I was slowly just pullin the diffuser out while pins in there and I hear slow cracking noises lol!
So I stopped ...

[Route 16]

Originally Posted by waterbottle1

So you actually push the tabs from inside the diffuser up?

I had pics before, but get a flashlight you should which tabs are the bumper and diffuser then work your way.

[waterbottle1]

i got lazy and gave up . lol
tried getting a flat head, getting under the bumper with a flash light. and poking at the clips and pushing it out.

it dont budge.