[brice618]

I recently ordered some STANADYNE and was curious how much to add each fillup (at 1/4 tank). Use the recommended amount or ?

Thank you!

[Vreimann]

Originally Posted by brice618

I recently ordered some STANADYNE and was curious how much to add each fillup (at 1/4 tank). Use the recommended amount or ?

Thank you!

Additive will be based on the concentration of the product. I have two different additives and they are different amounts. I have a nice little device that mounts on the additive bottle to measure the amount I pour into the tank.

[brice618]

Originally Posted by Vreimann

Additive will be based on the concentration of the product. I have two different additives and they are different amounts. I have a nice little device that mounts on the additive bottle to measure the amount I pour into the tank.

I need an end piece so I can carry half gallons in my trunk. I ordered this type;

http://www.amazon.com/gp/aw/d/B000M5PQAW/ref=redir_mdp_mobile?ref_=pe_385040_30332190_TE_3p _dp_1#

Half gallon sizes but it doesn't mention the concentration amount.

[Vreimann]

Originally Posted by brice618

I need an end piece so I can carry half gallons in my trunk. I ordered this type;

http://www.amazon.com/gp/aw/d/B000M5...90_TE_3p_dp_1#

Half gallon sizes but it doesn't mention the concentration amount.

Does it not say how many gallons the container will treat on the front of the packaging. Typically it will be 1:1000 or 1:500 for metric measurement systems.

Somewhere it should be on the label.

[temporaptor]

About 4 fluid oz.

[brice618]

Originally Posted by Vreimann

Does it not say how many gallons the container will treat on the front of the packaging. Typically it will be 1:1000 or 1:500 for metric measurement systems.

Somewhere it should be on the label.

I have not received them just yet. I was curious if I should go by what it says or a different amount considering the 335d.

[Vreimann]

Originally Posted by brice618

I have not received them just yet. I was curious if I should go by what it says or a different amount considering the 335d.

I use the recommended ratio. I typically calculate amount to fill and then measure out the amount. Below is the measuring apparatus I use.

http://www.dieselservices.com/images...nfo_Ezypor.pdf

[DbLog]

Isn't there a reference on the side of the bottle which shows how much a given amount will treat in gallons or am I missing something?

[32valves]

I put 4oz every fill up

[Vreimann]

Originally Posted by DbLog

Isn't there a reference on the side of the bottle which shows how much a given amount will treat in gallons or am I missing something?

It should say how much fuel the bottle treats.

[Brad335d]

Here it is from their website:

http://stanadyneadditives.com/performance-formula/