Help with down pipes!

2fast4ya · 06-19-2014, 09:34 PM

Hey guys I had down pipes on my car for two years I took them off today and installed the stock oem down pipes with converter. ..put the o2 sensors in and drove for about 25 miles around and my check engine is still on? I do have jb4 in but it's disabled so what am I doing here wrong any help would be great thanks

Conti. · 06-19-2014, 09:57 PM

Quote:

Originally Posted by 2fast4ya

Hey guys I had down pipes on my car for two years I took them off today and installed the stock oem down pipes with converter. ..put the o2 sensors in and drove for about 25 miles around and my check engine is still on? I do have jb4 in but it's disabled so what am I doing here wrong any help would be great thanks

what codes are getting? could have damaged the o2 sensor(s) and thats why you're throwing a code

SJ_1989 · 06-19-2014, 10:40 PM

Did you clear the codes after putting the OEM ones back in?

georgelb · 06-19-2014, 10:55 PM

I'd check and make sure you have the O2 sensors in the right banks.

2fast4ya · 06-19-2014, 11:16 PM

Quote:

Originally Posted by SJ_1989

Did you clear the codes after putting the OEM ones back in?

I did let it run in for bit and my check engine never went away so what I did I clear it with jb4 and than when I turn the car check engine pops back on...so later on I turned the jb4 off completely without deleting the check engine drove it for about 23miles still on...

2fast4ya · 06-19-2014, 11:17 PM

Quote:

Originally Posted by georgelb

I'd check and make sure you have the O2 sensors in the right banks.

I marked them off when I was taking them off so I put it back where it supposed to go..maybe drive it for certain miles idk...

2fast4ya · 06-19-2014, 11:18 PM

Quote:

Originally Posted by Conti.

what codes are getting? could have damaged the o2 sensor(s) and thats why you're throwing a code

I didn't scan it yet :/

Snypa · 06-21-2014, 12:43 PM

I'd scan too and if anything just clear them and watch for what comes back after...if any.

06-19-2014, 09:34 PM	#1
2fast4ya Private 7 Rep 99 Posts Drives: Bmw e90 (N54) Join Date: Feb 2013 Location: New York iTrader: (0)	Help with down pipes! Hey guys I had down pipes on my car for two years I took them off today and installed the stock oem down pipes with converter. ..put the o2 sensors in and drove for about 25 miles around and my check engine is still on? I do have jb4 in but it's disabled so what am I doing here wrong any help would be great thanks
	Appreciate 0 Tweet Quote

06-19-2014, 10:40 PM	#3
SJ_1989 Private First Class 41 Rep 151 Posts Drives: '08 335i Join Date: Mar 2012 Location: Illinoisssss iTrader: (5)	Did you clear the codes after putting the OEM ones back in? __________________ E90 335i 6MT soon to be drag car 📸 Follow my drag build on Instagram: Click here 🙏 🚧 Check out my drag build thread: Click here 🚧
	Appreciate 0 Quote

06-19-2014, 10:55 PM	#4
georgelb nsomneeak 39 Rep 501 Posts Drives: E92 RB 335i Join Date: Apr 2010 Location: DFW, TX iTrader: (3) Garage List 2007 335i [8.00]	I'd check and make sure you have the O2 sensors in the right banks. __________________ RB Turbos w/ N20 TMAP Sensor \| 93 Octane Protune by Cobb Plano \| xHP Stage 3 \| BMS DCI \| STETT CP \| Forge DVs \| RB PCV \| Helix FMIC \| CP-E Catted DPs \| Walbro 450 \| Bilstein B12 \| M3 Control Arms \| Defiv Lockdown Kit \| BBS CH \| Michelin A/S 3+ Hixson BMW of Monroe, LA - Shady Dealer \|
	Appreciate 0 Quote

06-21-2014, 12:43 PM	#8
Snypa Captain 40 Rep 656 Posts Drives: Like a mahdman ! Join Date: May 2013 Location: I-75 iTrader: (3)	I'd scan too and if anything just clear them and watch for what comes back after...if any. __________________ SUPER SLOW E90
	Appreciate 0 Quote