[adubey]

I was hoping someone on here would let me borrow / rent their sparkplug tool so I can change my sparkplugs or even better one of you awesome mechanically inclined guys would change them for me for a reasonable price.

Also, open to going to a shop that isn't going to charge be ridiculous amounts of labor.

Thanks in advance!

[cialz]

http://www.amazon.com/CTA-Tools-2376...park+plug+tool

I got this only problem is the rubber gasket is too tight so I just pull it out when I install the plugs.

its so easy that if you cant figure out how to do it then you shouldn't even bother trying.. it takes like 30 minutes if you take a coffee break.

[specialist]

just go to part source and get the tool size then grind down the sides to slide in the hole loosen the spark plug then get a small magnet pen to pull the spark plug

done

[KiX1911]

I have the tool if you want to borrow, or buy from me since I have 2. One is brand new

It's not too hard to change, I could even help you....I'll charge you......free 99

B

[bimmergixxer]

I changed mine with no special tools. A standard socket set with a little ingenuity and determination is all it takes.

[Mike@N54Tuning.com]

We have the spark plug tool for 19.00. Almost always in stock as well

Mike

[fizzerd]

Originally Posted by Mike@N54Tuning.com

We have the spark plug tool for 19.00. Almost always in stock as well

Mike

How much for the plugs?

A mechanic quoted me $240 for parts and labour..