|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Bmw cannot find reason for engine malfunction
|
|
07-15-2014, 08:28 AM | #1 |
Private
6
Rep 98
Posts |
So as some of you have seen over the months i have been trying to source a reason for my car throwing 30fe everytime it gets warmed up (when oil temp hits 235 ish )and at WOT . I finally gave in and took it to dealership and they cannot figure it out at all .. Say theyve done every test they could and cant find a problem .Its so frustrating that they cannot recreate the problem and i know ill pick it up today drive for 10 minutes and it will go right into limp mode ..if anyone may have any ideas please speak up .. I have replaced every sensor u can think of relating to boost pressure .. I have replaced diverter valves i dont not get any wastegate rattle .. Maybe a little on a cold night start but goes right away.. There are no leaks ..
|
07-15-2014, 09:26 AM | #2 | |
Captain
53
Rep 719
Posts |
Quote:
__________________
ASE master tech (many moons ago)335xi- JB4 G5 iso/e50 custom flash/Custom meth/Borla mids/Custom x-pipe/DCI/ER charge pipe/Dual Ebay BOV's/Alpina B3 flash/Paddle shifter retro fit
|
|
Appreciate
0
|
07-15-2014, 09:13 PM | #3 |
Private
6
Rep 98
Posts |
Its so sporadic.. Sometimes it hits target and holds but will still throw code sometimes it will die off like a clear boost like and other times it will die off and then spike but i think the spike is coming from the dv slamming closed.. I only put jb4 in for like 2 days because my mechanical boost gauge just was easier to follow .. But ya i never logged it
|
Appreciate
0
|
Bookmarks |
|
|