[JTinNC82]

I keep getting the engine malfunction light every time im getting on it in race gas map which is map 7 on the JB4. I either run 100 or 104 unleaded gas while using this map. Not to sure whats going on. It will show the engine malfunction light then throw it into map 4. It even did it in the auto tune map once. Codes I pull are below. I did a search on the air intake code and cleaned my map sensors off with crc electrical cleaner and still having the issue. The other post I have seen people are having injector or pump problem and bad idle afterwards but mine seems too idle pretty much normal. Any ideas?

2F6C Ext flap ( Have it unpluged )

2C7F Lambda probe behind catalytic converter 2, trimm control
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Signal or value below threshold

2C6A Lambda probe behind catalytic converter, muddled
Error will cause a warning light
Error is not currently present
Test conditions have been completed

2FDC intake air temperature, signal: gradient
Error will cause an error light
Error is not currently present
Test conditions have been completed

Mods:
VRSF Downpipes
Injen Intake
JB4
ER long charge pipe w/ Tial BOV