Newbie coder NCS Expert errors. Help please

L1oydee · 08-31-2014, 11:42 AM

So, I thought I'd have a go at coding a couple of features on my E90.

Purchased K+DCAN cable from ebay, installed BMW Tools 2.50 as well as NCS Dummies.
I can connect to the car ok and INPA shows batt and Ignition connection ok, so far so good.
Connected with NCS expert no problem, but as soon as I hit execute job I get the following error.

"COAPI-2021 Datatransmission to ECU Disturbed IFH0010 Datatransmission to controlunit Disturbed FRM_70
COAPI-2021 Datatransmission to ECU Disturbed CODIERDATEN_LESEN"

I have re-installed drivers and NCS as well as updating to the SP_DATEN_53.3 but still the same error.
It looks like it has read the ecu as the FSW_PSW_TRC trace file has code in it after a read but I'm not sure if it has read the entire file.
I am thinking faulty cable but wondered if you guy's have any other ideas?

Thanks in advance for your help.

makkan00 · 08-31-2014, 11:46 AM

For newbies

http://www.e90post.com/forums/showthread.php?t=1018236

L1oydee · 08-31-2014, 11:54 AM

Quote:

Originally Posted by makkan00

For newbies

http://www.e90post.com/forums/showthread.php?t=1018236

Hi Makan00.

I looked at BMWhat app but it won't let me code my angel eyes as DRL, iViNi said it's in development, hence the NCS Expert route.

Any ideas?

M5rius · 08-31-2014, 11:55 AM

Disable antivirus software and firewall if you have one . I'm running nod32 and it doesn't allow to read/code the car .

L1oydee · 08-31-2014, 12:00 PM

Thanks M5rius.
I disabled the firewall but no joy.

sylonien · 08-31-2014, 02:32 PM

Quote:

Originally Posted by L1oydee

Hi Makan00.

I looked at BMWhat app but it won't let me code my angel eyes as DRL, iViNi said it's in development, hence the NCS Expert route.

Any ideas?

What do you mean by 'code angels eyes as Daytime Running Lights?'

Isn't that enabled already in your car?

L1oydee · 08-31-2014, 03:16 PM

Yes, but when I turn DRL on I get low beam as well as AE's, I just want AE.

M5rius · 08-31-2014, 04:38 PM

Try different USB port it might help

L1oydee · 09-01-2014, 04:44 PM

Just in case anyone else has the same problem, I fixed it.

Just set Latency to 1ms.
Open device manager, select com 1, properties, port settings tab, advanced button, Latency.
Works a treat.

08-31-2014, 11:42 AM	#1
L1oydee Enlisted Member 1 Rep 39 Posts Drives: E90 330D M Sport Join Date: Jan 2014 Location: Essex, UK iTrader: (0)	Newbie coder NCS Expert errors. Help please So, I thought I'd have a go at coding a couple of features on my E90. Purchased K+DCAN cable from ebay, installed BMW Tools 2.50 as well as NCS Dummies. I can connect to the car ok and INPA shows batt and Ignition connection ok, so far so good. Connected with NCS expert no problem, but as soon as I hit execute job I get the following error. "COAPI-2021 Datatransmission to ECU Disturbed IFH0010 Datatransmission to controlunit Disturbed FRM_70 COAPI-2021 Datatransmission to ECU Disturbed CODIERDATEN_LESEN" I have re-installed drivers and NCS as well as updating to the SP_DATEN_53.3 but still the same error. It looks like it has read the ecu as the FSW_PSW_TRC trace file has code in it after a read but I'm not sure if it has read the entire file. I am thinking faulty cable but wondered if you guy's have any other ideas? Thanks in advance for your help.
	Appreciate 0 Tweet Quote

08-31-2014, 11:46 AM	#2
makkan00 Major General 896 Rep 9,105 Posts Drives: F83 and F36 Join Date: Dec 2011 Location: Essex iTrader: (56)	For newbies http://www.e90post.com/forums/showthread.php?t=1018236 __________________ F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play
	Appreciate 0 Quote

08-31-2014, 11:55 AM	#4
M5rius Banned 11 Rep 350 Posts Drives: e92 Join Date: Jul 2014 Location: sussex iTrader: (0) Garage List 2007 bmw e92 [9.00]	Disable antivirus software and firewall if you have one . I'm running nod32 and it doesn't allow to read/code the car .
	Appreciate 0 Quote

08-31-2014, 12:00 PM	#5
L1oydee Enlisted Member 1 Rep 39 Posts Drives: E90 330D M Sport Join Date: Jan 2014 Location: Essex, UK iTrader: (0)	Thanks M5rius. I disabled the firewall but no joy.
	Appreciate 0 Quote

08-31-2014, 03:16 PM	#7
L1oydee Enlisted Member 1 Rep 39 Posts Drives: E90 330D M Sport Join Date: Jan 2014 Location: Essex, UK iTrader: (0)	Yes, but when I turn DRL on I get low beam as well as AE's, I just want AE.
	Appreciate 0 Quote

08-31-2014, 04:38 PM	#8
M5rius Banned 11 Rep 350 Posts Drives: e92 Join Date: Jul 2014 Location: sussex iTrader: (0) Garage List 2007 bmw e92 [9.00]	Try different USB port it might help
	Appreciate 0 Quote

09-01-2014, 04:44 PM	#9
L1oydee Enlisted Member 1 Rep 39 Posts Drives: E90 330D M Sport Join Date: Jan 2014 Location: Essex, UK iTrader: (0)	Just in case anyone else has the same problem, I fixed it. Just set Latency to 1ms. Open device manager, select com 1, properties, port settings tab, advanced button, Latency. Works a treat.
	Appreciate 0 Quote