[bmw328xiAWD]

hi guys, i have a 2007 bmw 328xi , 3 days ago the battery died , it was some after market crap , I jump started it with another car and it started but I remember when I was connecting the negative cable I saw a spark which I think is normal but in my case it could have blow a fuse or something. Right after jump starting I got 4 warning lights on...BRAKE, DTC, ABS, 4X4. So basically my AWD is disabled at the moment. I also went and bought a new BMW battery which was put in my a friend of mine who works for BMW he also did the registration with his laptop. He tried clearing the codes but they wont go away. He told me to come back Sunday and he will reprogram the whole car.

He also told me I should never jump a bmw with another car that could have burned the servo motor in transfer case. I am thinking if I burned a fuse or something in fuse box that could have disabled the AWD? I took picture of the fuse diagram for anyone that can give some hints on which fuse I should check that could have disabled AWD....Hope to get some answers soon

He also turned the wheel left and right but no changes. He told me I could have blown the servo motor in transfer case or something by jumping the car with another car...He will REPROGRAM the car on sunday and see if it gets rid of it if not he said to buy a servo motor??

Here is link to FUSE DIAGRAM of my car -- http://postimg.org/image/vshnucy7t/

Here is link to back of fuse diagaram - http://postimg.org/image/6tuz0cng5/

[Taskmaster]

Replace the DSC/ABS fuses first.

[330xtrai]

^+1
Check the fuses for awd/dsc . There's a whole thread where people were pulling the fuse and getting rwd but this also caused the speedo to not work and wipers to keep wiping. Also after you put them use back in the lights would stay try driving it around. Make sure that the car is in rwd mode or not should be easy by pressing gas on a turn you should drift/wheelspin pretty easy.

[Taskmaster]

Have the codes been pulled?