[ellinara]

Hi everyone,

This is my first post so first off I wanted to say hi to the community and thank you for all the excellent material!

So I am trying to code the KOMBI module on my E92 2007 328xi via NCS Expert and I get the following dialog when reading the module:

COAPI-2000: EDIABAS or SGBD error
BIP-0009: Best Version Error

Error Log:

ERROR! Modul: LFCDHDIA.CPP (A_PL2KMB.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2KMB

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2KMB.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

My setup is as follows:

Windows 7 Ultimate 32bit
K+DCAN Cable from onestopelectronics.com
BMW Standard Tools 2.12
Datens 50.2 for E89
BMW Coding Tool 2.50

INPA and everything else works great and I am able to code all the other modules on the car no problem.
Modules that I have coded include:

CAS
FRM
JBBF
RAD

Thanks everyone!!!

[cryptomit]

update Standard Tools to 2.12 version. You have now 2.11

[ellinara]

Thanks Cryptomit for your quick response. I looked at the properties of the installation file that I used and it says I am using 2.12. See picture attached.

[cryptomit]

and what daten version do you use?

[ellinara]

My datens are 50.2. I am updating to 53.3 as soon as the file unzips. I'll let you know of the result.

Thanks again!!!

[ellinara]

The 53.3 datens did the trick!!!

Thanks for all your help.

[cryptomit]

np, great that it worked.