[Precision Engineered]

Hi All,

Currently going through the Logic 7 Retro fit process on my 330D E92 with CIC I drive. I have the OEM Logic 7 Wiring harness but not too sure where the amp gets its power from?

From the wiring diagram below I understand the Positive power wire is Red & Grey but I'm not 100% sure where this is supposed to run to from the harness on the amp. Also when I've wired amps in the past they normally need a remote start, is this not the case with the Logic 7 i.e the power wire is some how connected in with the CIC system? The power wire seems as long as the front dash speaker wire so I assume it wires in somewhere round there. Can anyone with logic 7 confirm? Can I just run this to the battery in the boot with an inline fuse? If so what rating of fuse?

Hope someone can help

[makkan00]

Goes to the fuse box.
In Uk cars, wiring should run on the passenger side.

[Precision Engineered]

Originally Posted by makkan00

Goes to the fuse box.
In Uk cars, wiring should run on the passenger side.

Cheers bud, last thing I need to know really is which module does it wire into in the fuse box?

[makkan00]

Originally Posted by Precision Engineered

Cheers bud, last thing I need to know really is which module does it wire into in the fuse box?

There is no module in fuse box. Behind every fuse there is clip which goes to different modules / items of your car.
You should look at the fuse number of navigations / amp and should be able to find.
There should be three or four fuses for navigation and one of them is for amp.