[mr p-j]

Originally Posted by Precision Engineered

Can you post the software versions you used?

X2

[Precision Engineered]

Originally Posted by mr p-j

X2

Cheers, did you have it running on Windows 7 64bit? 64bit being the important part

[cryptomit]

It works on Win 7 and 8 64bit

[phubar]

Originally Posted by xxxjecxxx

Thank you Chewy734

Here are the links for new downloads.

http://www.dehmicro.com/bmw



1) Install BMW standard tools
2) Replace folders with ones provided
3) Install drivers for your cable

Hope this help anybody having issues: couldnt use these files as posted, INPA and NCS expert would not communicate with any of the modules, made sure I was getting the complete file and after a couple of hours I narrowed it down to missing files in the ECU folder under EDIBAS, I re-installed 6.4.3 and saved the EDIBAS folder and re-installed the files in the post above and replaced the ECU folder, works like a charm and I finally have a running INPA install that doesn't require a clumsy virtual pc, thanks!

[khoda355]

okay i need some help... have been trying to do this for 3 days now and I am just so lost..


SO this is what I have to far, I successfully have the program and files that are needed and posted in here... and i can get the INPA to show its connected to the car with battery on ect... but it does not show car models on it.

I am trying to run some tests on my E46 with this. coding after when I get more time with the E90..

Any help would be great PLZ!

[khoda355]

well i got most of it working.... now im getting this..

Variant checking
sys-0005: OJECT FILE NOT FOUND. Program will be stopped!

help plz!

[Johnvanvo]

Hey guys,
I have an e90 325i, and i was wondering if this cable work?
http://www.ebay.com/itm/For-BMW-INPA...item2c76bc2470


Thank you!

[andrzeju]

I coded my car (2007 328xi) without any issues. I want to help my brother-in-law now who has 2012 328i and got error messages.
F1 -> F3 -> Select e89 -> Select CAS
I get to the screen with correct vin and blank fa with the follwing error message: "Invalid feature for FA" Any idea what can be wrong? I use my laptop and my cable. Since it is a newer car, should I update "Daten Files"? If yes, how to do that? Just copy/paste or I need to configure something else?
Thanks for any info.

[Vishnu]

Will coding work with a elm327 OBD ..?

[jc_bmw]

Originally Posted by Vishnu

Will coding work with a elm327 OBD ..?

with the BMWhat app

[sclawrenc]

Originally Posted by khoda355

well i got most of it working.... now im getting this..

Variant checking
sys-0005: OJECT FILE NOT FOUND. Program will be stopped!

help plz!

Have searched the internet up and down, and I'm not sure what to do to fix this.I am getting the same error and have installed everything just like instructed to. I have tried this on two diffferent Win7 64bit laptops and get the same error. I can connect using my cable and INPA sees that the ignition is on or off, but when I try to pull up airbag info or any other info, I get the error shown in the linked screen shot . I also get the question marks under INPA info which you can see in the other linked screen shot.

Does anyone know what might be the problem? From what I've read thus far, it seems something might be missing in my ECU folder, but I'm not certain at all on that.

https://drive.google.com/file/d/0B3Y...ew?usp=sharing

https://drive.google.com/file/d/0B3Y...ew?usp=sharing

Also this is my first post on this site. Thank you to everyone for their contributions!!

[farax330D]

I did this recently, had errors initially but after a restart it worked like a charm..

if anyone in and around London needs help PM me...

[sclawrenc]

I restarted both and they both still didn't work.

[sclawrenc]

Still getting the sys-0005 on Win7 64bit.

Originally Posted by sclawrenc

Have searched the internet up and down, and I'm not sure what to do to fix this.I am getting the same error and have installed everything just like instructed to. I have tried this on two diffferent Win7 64bit laptops and get the same error. I can connect using my cable and INPA sees that the ignition is on or off, but when I try to pull up airbag info or any other info, I get the error shown in the linked screen shot . I also get the question marks under INPA info which you can see in the other linked screen shot.

Does anyone know what might be the problem? From what I've read thus far, it seems something might be missing in my ECU folder, but I'm not certain at all on that.

https://drive.google.com/file/d/0B3Y...ew?usp=sharing

https://drive.google.com/file/d/0B3Y...ew?usp=sharing

Also this is my first post on this site. Thank you to everyone for their contributions!!

Just wondering if anyone could shed some light on what might be wrong. Thanks!!

[cryptomit]

Update your daten files.

[smallseafishie]

Originally Posted by xxxjecxxx

Update 9/14/14

Thank you Chewy for hosting the files

http://www.dehmicro.com/bmw

1) Install BMW standard tools
2) Replace folders with v49
3) Install cable drivers

I found that the rar file is incomplete when downloading through chrome or IE. I had to use wget to get the v49 folder in it's entirety.

[allotherareused]

Hi guys,

I've just downloaded "SP-Daten v.2.53.0.5" from http://allautoinfo.org/diagnostic/17...daten-v53.html

Still haven't installed and tested, should works I guess, just ... has to download more than 46 GB and to realize this is not compressed at all, actually, some things are "compressed" to bigger file size. Right now re-compressing for my backup and wondering ...

Do you guys want to keep this as torrent for a while ? My upload is not so good but I can keep that for long time, question is : are there at least 10 more people with descent upload to keep this torrent online as well ?

Regards,
Dejan

[dy63]

ive been trying to code WL_FL to have my high beams come on when i unlock the car

i am putting in the soft_einschalten in the nicht aktiv field.

spelt it right and all but when i change job to sg codieren and select execute it keeps giving me error. when i change wl_fl back to nicht aktiv it executes fine.

anyone know how i get NCS to recognise the soft einschalten >?

[cryptomit]

What FRM version you have?

[bajandrifter]

Originally Posted by cupraraj

ive been trying to code WL_FL to have my high beams come on when i unlock the car

i am putting in the soft_einschalten in the nicht aktiv field.

spelt it right and all but when i change job to sg codieren and select execute it keeps giving me error. when i change wl_fl back to nicht aktiv it executes fine.

anyone know how i get NCS to recognise the soft einschalten >?

WONT WORK ON A 2006 AS THE FRM1 MODULE DOSNT SUPPORT THIS FUNCTION (HEADLIGHT, FOG ETC. ON WITH COMFORT LIGHTS)

YOU NEED FRM2 OR HIGHER. ALSO TRY USING NCS DUMMY TO EDIT THE TRACE FILES. ITS SOOOOO MUCH EASIER

[myeager1967]

xxxjecxxx, I see from a previous message that you are in Orlando. I am down the street in Kissimmee and would love to get my laptop up and running to do a little diagnostic and coding. I've got some of the software installed but not exactly sure what needs to be done and when to get things right. Don't want to screw this up for obvious reasons. Any chance you'd be available to help? Also, I've got a large NAS drive that's online 24/7, if you'd like, I can set up an FTP server on it to host these files and any changes that need to be made to them. I would also be willing to host the files with torrent links if that was the preferred way to go. My Bittorrent client runs 24/7 on the NAS box. Already host Ubuntu and a few other files full time....

[OnionKnight]

I've been trying to figure out how to code and enable the automatic headlight sensitivity selection for my 03/2007 328xi WITH iDrive but I haven't had much luck finding out how. The OEM setting is way too sensitive. The Google sheet for list of coding options for e9x's shows how to do this, but only for vehicles without nav/iDrive like I have. I'm not sure if I just don't have the updated version of the list or what. I came across something relevant to this on page 95 but it didn't help me a whole lot I'm still a bit confused. If someone could help me out or guide me to the right place to find the answers, I would greatly appreciate it. I'm also wondering if BMWhat can handle the coding for this. Thanks!