Glow Plug Replacement DIY

minus13 · 02-12-2015, 08:26 AM

I have searched and I cannot find. I am throwing an SES. It points to a glow plug. The SES light coincides with slightly rough cold starts. I am at 50,000 miles.

It's time. Please help.

Yozh · 02-12-2015, 03:59 PM

Start from this page:
http://workshop-manuals.com/bmw/3_se...47t2___m57t2)/

locolobo · 02-13-2015, 07:18 PM

I did mine this summer when I had to replace the glow plug controller; you have to remove the intake manifold. Once the intake is off, you have pretty easy access. Even though no plugs were bad, I replaced them just because everything was apart, and cleaned the intake.

mickyboy1 · 02-20-2015, 04:06 AM

is this the same process for the 325D (e92) my car was made 16th November 2007.

I want to change the glow plug module so using this how to above to get to it.

02-12-2015, 08:26 AM	#1
minus13 Private 2 Rep 93 Posts Drives: 2009 335D Join Date: Feb 2012 Location: South Carolina iTrader: (1)	Glow Plug Replacement DIY I have searched and I cannot find. I am throwing an SES. It points to a glow plug. The SES light coincides with slightly rough cold starts. I am at 50,000 miles. It's time. Please help.
	Appreciate 0 Tweet Quote

02-12-2015, 03:59 PM	#2
Yozh Colonel 881 Rep 2,611 Posts Drives: 2011 335d M-Sport Join Date: Mar 2014 Location: Wet Coast iTrader: (4)	Start from this page: http://workshop-manuals.com/bmw/3_se...47t2___m57t2)/
	Appreciate 0 Quote

02-13-2015, 07:18 PM	#3
locolobo Oil Burner 23 Rep 119 Posts Drives: 2009 335d Barbera Red Metallic Join Date: May 2013 Location: Columbus, Ohio iTrader: (1) Garage List 2013 Volkswagen Pas ... [0.00] 2004 Honda Pilot [0.00] 2009 335d [0.00]	I did mine this summer when I had to replace the glow plug controller; you have to remove the intake manifold. Once the intake is off, you have pretty easy access. Even though no plugs were bad, I replaced them just because everything was apart, and cleaned the intake. __________________ 2009 335d Barbera Red Metallic; Mods: BPC tuned, Bohl Diesel Performance, Laser Veil, BelTronics Pro 500
	Appreciate 0 Quote

02-20-2015, 04:06 AM	#4
mickyboy1 Private 1 Rep 81 Posts Drives: BMW E92 Join Date: Jul 2014 Location: UK iTrader: (0)	is this the same process for the 325D (e92) my car was made 16th November 2007. I want to change the glow plug module so using this how to above to get to it.
	Appreciate 0 Quote