More 335 drama

edyuly · 11-22-2014, 09:24 AM

I have an 07 335 manual transmission. Full bolt on with meth. I just replaced the engine as the first engine ran lean on cylinder 2 causing piston failure bad injector. Now the current engine has 70k been on for about 1500 miles was getting on it in 2nd gear missed third and got codes 2a99,2a98,3100 change both vanos and nothing read on forums says probably the cam ledge bearings. Order them online and rent tool. Install them as soon as I turn car on get a 2aa4,3100 code. I need some help as I am at a loss here, also changed the wheel that is in front of the cams bolted on to the cam vanos unit And no luck. Any help

Thanks

spxxx · 11-22-2014, 11:26 AM

Quote:

Originally Posted by edyuly

I have an 07 335 manual transmission. Full bolt on with meth. I just replaced the engine as the first engine ran lean on cylinder 2 causing piston failure bad injector. Now the current engine has 70k been on for about 1500 miles was getting on it in 2nd gear missed third and got codes 2a99,2a98,3100 change both vanos and nothing read on forums says probably the cam ledge bearings. Order them online and rent tool. Install them as soon as I turn car on get a 2aa4,3100 code. I need some help as I am at a loss here, also changed the wheel that is in front of the cams bolted on to the cam vanos unit And no luck. Any help

Thanks

Just changed the cam ledges in my 07 n54, was having the exact same codes as you.

335NJ · 11-22-2014, 01:11 PM

When you missed third, did you money shift it? Like brought the revs up past redline?

edyuly · 11-22-2014, 03:40 PM

i might have hit 7000rpm. i usually rev till 5800. the 2a98,2a99 cleared when i did the cam bearing ledges. But i have 2aa4 and i have no clue what that is. I just received my Vargas stage 2+ . want to see how much this is gonna cost me.

335NJ · 11-22-2014, 07:51 PM

Quote:

Originally Posted by edyuly

i might have hit 7000rpm. i usually rev till 5800. the 2a98,2a99 cleared when i did the cam bearing ledges. But i have 2aa4 and i have no clue what that is. I just received my Vargas stage 2+ . want to see how much this is gonna cost me.

http://www.e90post.com/forums/showthread.php?t=689813

edyuly · 11-23-2014, 04:40 PM

Quote:

Originally Posted by 335NJ

http://www.e90post.com/forums/showthread.php?t=689813

Did that no luck.thanks

j1gilles · 11-23-2014, 10:35 PM

Did you replace the cam sensor?

Spacecpe · 02-20-2015, 05:00 PM

Quote:

Originally Posted by edyuly

Did that no luck.thanks

Did you end up fixing your issue ?

11-22-2014, 09:24 AM	#1
edyuly Private 3 Rep 50 Posts Drives: 07 335i Join Date: Feb 2010 Location: easton pa iTrader: (2)	More 335 drama I have an 07 335 manual transmission. Full bolt on with meth. I just replaced the engine as the first engine ran lean on cylinder 2 causing piston failure bad injector. Now the current engine has 70k been on for about 1500 miles was getting on it in 2nd gear missed third and got codes 2a99,2a98,3100 change both vanos and nothing read on forums says probably the cam ledge bearings. Order them online and rent tool. Install them as soon as I turn car on get a 2aa4,3100 code. I need some help as I am at a loss here, also changed the wheel that is in front of the cams bolted on to the cam vanos unit And no luck. Any help Thanks
	Appreciate 0 Tweet Quote

11-22-2014, 01:11 PM	#3
335NJ Colonel 535 Rep 2,872 Posts Drives: 2008 335i 6MT E90 Join Date: Feb 2014 Location: NJ/Philadelphia Suburbs iTrader: (1)	When you missed third, did you money shift it? Like brought the revs up past redline?
	Appreciate 0 Quote

11-22-2014, 03:40 PM	#4
edyuly Private 3 Rep 50 Posts Drives: 07 335i Join Date: Feb 2010 Location: easton pa iTrader: (2)	i might have hit 7000rpm. i usually rev till 5800. the 2a98,2a99 cleared when i did the cam bearing ledges. But i have 2aa4 and i have no clue what that is. I just received my Vargas stage 2+ . want to see how much this is gonna cost me.
	Appreciate 0 Quote

11-23-2014, 10:35 PM	#7
j1gilles Captain 53 Rep 719 Posts Drives: 2009 335xi Join Date: Feb 2013 Location: Chicago iTrader: (0)	Did you replace the cam sensor? __________________ ASE master tech (many moons ago)335xi- JB4 G5 iso/e50 custom flash/Custom meth/Borla mids/Custom x-pipe/DCI/ER charge pipe/Dual Ebay BOV's/Alpina B3 flash/Paddle shifter retro fit
	Appreciate 0 Quote