|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Question with methanol and jb4
|
|
03-18-2015, 10:00 AM | #1 |
Boosty
56
Rep 329
Posts |
Question with methanol and jb4
Okay. So I got my methanol kit hooked up. Everything went smooth. I did the 7/5 and put the pedal to the floor to get the air bubbles out. No problem. The oil gauge gets hijacked and increases with the pedal.
When I'm driving and I floor in on map 3 it pulls like a rocket. Hits around 18psi. (Hard to look down lol) But the oil gauge is staying at 0? Also on the laptop the meth is at 0 also... But when I pull over I feel my intake manifold and it's cool to the touch along with the charge pipe so I know it's spraying. I have the methanol settings set at default. Can anyone shed some light? Also I have the RB turbos so I want to get the max power I can. On pump and on e85! What should my settings be. Thanks guys!!!
__________________
'08 335i AT Alpina Flash~Rob Beck Turbos~Full kittyless exhaust~DCI~5" Intercooler~Chargepipe BOV~BMS meth kit
|
03-18-2015, 10:51 AM | #2 |
ex deus machina
128
Rep 968
Posts |
post logs
and post screen shots of the JB4 interface: methanol setting tab
__________________
Daily: G30 M550i, Bluestone, JB4, 1 step colder plugs, 6WB retrofit
Winter Beast: Audi S4 4.2L V8, Supercharger, brakes, suspension & exhaust mods Wifes': F15 M50d clone, DUDMD tune, WMI, MPBK Gone: E92 335i N54 468rwtq |
Appreciate
0
|
Bookmarks |
|
|