Will 19x9.5 et27 Fit on E90?

Tim603 · 04-07-2015, 03:23 PM

Hey Everyone!

Ive done some searching but I figured I would make this as an easy searchable thread for anyone looking to run this setup.

Any input on whether this setup will work on my car? I am looking at Avant Garde M510s Square set of 19x9.5 et27 with 235/35 tires.

I am okay with fender rolling the rear, I am just a little concerned about the offset fitment on the front.

Thanks!

Tim603 · 04-07-2015, 06:24 PM

http://www.e90post.com/forums/showthread.php?t=674359

Found this, the 19x9.5 et25 seems to poke on the front. I will probably go with an ET30 to be safe.

I think the highest offset I can run is an et33 for 19x9.5 to clear the inner strut

bmw325i · 04-07-2015, 07:03 PM

It will fit as is. You should roll/shave the rear and add a spacer to match the front. The front wheel will poke about 3mm. If you don't like the poke you can take out the alignment pin to get a little bit more negative camber.

04-07-2015, 03:23 PM	#1
Tim603 Colonel 488 Rep 2,283 Posts Drives: 2007 335i E90 Join Date: Feb 2012 Location: North Canton, OH iTrader: (8) Garage List 2007 335i [0.00]	Will 19x9.5 et27 Fit on E90? Hey Everyone! Ive done some searching but I figured I would make this as an easy searchable thread for anyone looking to run this setup. Any input on whether this setup will work on my car? I am looking at Avant Garde M510s Square set of 19x9.5 et27 with 235/35 tires. I am okay with fender rolling the rear, I am just a little concerned about the offset fitment on the front. Thanks! __________________ Build Thread
	Appreciate 0 Tweet Quote

04-07-2015, 06:24 PM	#2
Tim603 Colonel 488 Rep 2,283 Posts Drives: 2007 335i E90 Join Date: Feb 2012 Location: North Canton, OH iTrader: (8) Garage List 2007 335i [0.00]	http://www.e90post.com/forums/showthread.php?t=674359 Found this, the 19x9.5 et25 seems to poke on the front. I will probably go with an ET30 to be safe. I think the highest offset I can run is an et33 for 19x9.5 to clear the inner strut __________________ Build Thread
	Appreciate 0 Quote

04-07-2015, 07:03 PM	#3
bmw325i Major General 237 Rep 5,118 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	It will fit as is. You should roll/shave the rear and add a spacer to match the front. The front wheel will poke about 3mm. If you don't like the poke you can take out the alignment pin to get a little bit more negative camber.
	Appreciate 0 Quote