Helix Attaché 335i (Auto) VS PROcede 1.47 335i (6 spd) VIDEO

AU335 · 12-08-2007, 08:19 PM

Quote:

Originally Posted by Trill335

Please post the timeslips on the Mcoupe once you make a few passes at the dragstrip. I'm very interested in this 113 trapspeed.

Hey man, how's the 335i? Have you had a chance to install the JBS2 yet?

TurboBullett@Ambient Thermal Management · 12-08-2007, 08:22 PM

Quote:

Originally Posted by SGP335i

Attache should be dynoing at 400+ whp for that to happen. Can't wait to see those dynos

well according to the online weight to trap speed calculator my car was making 388whp to run 113.2mph at 3400lbs.

Artz 330 · 12-08-2007, 08:24 PM

Quote:

Originally Posted by TTurboBullett

well according to the online weight to trap speed calculator my car was making 388whp to run 113.2mph at 3400lbs.

me and alex are leaving at 8:30 AM tomorrow to come down.

TurboBullett@Ambient Thermal Management · 12-08-2007, 08:28 PM

Quote:

Originally Posted by Artz 330

me and alex are leaving at 8:30 AM tomorrow to come down.

I work till noon in Cherry Hill give Ant a call and he'll meet up w you guys. I should get there a little after noon

Artz 330 · 12-08-2007, 08:41 PM

damn these calcultors are insane accurate

1/4 mile time: 12.6

Trap Speed: 113

Weight of vehicle
with driver (pounds): 3193 (Weighed at local scale with me + 1/8th Tank)

Horsepower @ flywheel = 337.53 HP

BMW says 330 HP for the M coupe and TMS estimates 7-10 HP Crank for the pulleys so this is pretty accurate.

http://www.turnermotorsport.com/imag...e46pullies.jpg

Artz 330 · 12-09-2007, 10:18 AM

looks like we got rained out.

Eazyrock · 12-09-2007, 10:20 AM

Quote:

Originally Posted by Artz 330

looks like we got rained out.

boooty

Helix Wildebeest · 12-09-2007, 11:40 AM

Oh well as soon as Mark is done with work I think we are going to start our intake design.

BoostedBMW · 12-09-2007, 11:41 AM

Quote:

Originally Posted by SpaRTan8

Oh well as soon as Mark is done with work I think we are going to start our intake design.

For which car? 335 or SRT8?

Artz 330 · 12-09-2007, 11:47 AM

LOL I was out on a milk run this morning and stumbled upon a SRT-8 Magnum. Long story short I pulled about 1-1 1/2 Cars on it in the M Coupe.

Roads are pretty dry, they should open atco up.

Helix Wildebeest · 12-09-2007, 12:25 PM

Quote:

Originally Posted by Artz 330

LOL I was out on a milk run this morning and stumbled upon a SRT-8 Magnum. Long story short I pulled about 1-1 1/2 Cars on it in the M Coupe.

Roads are pretty dry, they should open atco up.

Well if you can beat the SRT8 then I have an SRT4 waiting for ya

Also we have the filter assembly here for the 335. This way we can moch up the madrels for the silicone hoses.

Artz 330 · 12-09-2007, 12:29 PM

Quote:

Originally Posted by SpaRTan8

Well if you can beat the SRT8 then I have an SRT4 waiting for ya

Also we have the filter assembly here for the 335. This way we can moch up the madrels for the silicone hoses.

Well, than I have a 335i waiting for you...

Trill335 · 12-10-2007, 01:00 PM

Quote:

Originally Posted by AU335

Hey man, how's the 335i? Have you had a chance to install the JBS2 yet?

Sent you a P.M. I was at the dragstrip all day Sunday! Got to see some pretty good grudge racing...lost a hundred bucks on a damn scam

.

Didn't run the car because I didn't bring the tools to install the software! I need to link up with you and get the JBS on the car! I'm loosing money by not racing!

AU335 · 12-10-2007, 02:52 PM

Quote:

Originally Posted by Trill335

Sent you a P.M. I was at the dragstrip all day Sunday! Got to see some pretty good grudge racing...lost a hundred bucks on a damn scam

.

Didn't run the car because I didn't bring the tools to install the software! I need to link up with you and get the JBS on the car! I'm loosing money by not racing!

Losing money isnt good! Lets get that JB2 on already. How about this wednesday? I just sent you a PM

Helix Wildebeest · 12-10-2007, 03:05 PM

Quote:

Originally Posted by Artz 330

Well, than I have a 335i waiting for you...

A pic of the SRT-4

f1nch · 12-10-2007, 03:44 PM

DEMENTEch335i · 12-10-2007, 03:51 PM

Did anyone knows if the Helix attache can be reprogramed(Custom map) like PROcede??..

Helix Wildebeest · 12-10-2007, 03:55 PM

Quote:

Originally Posted by DEMENTEch335i

Did anyone knows if the Helix attache can be reprogramed(Custom map) like PROcede??..

Right now we can do it, but it will be an in house procedure

DEMENTEch335i · 12-10-2007, 04:00 PM

Quote:

Originally Posted by SpaRTan8

Right now we can do it, but it will be an in house procedure

So right now the only systems that can be reprogramed with a custom map without issues are PROcede and Exede??..

e90AW335i · 12-10-2007, 04:08 PM

Quote:

Originally Posted by DEMENTEch335i

So right now the only systems that can be reprogramed with a custom map without issues are PROcede and Exede??..

I didnt think you could get a custom map for PROcede....

(off-topic, i know)

Artz 330 · 12-10-2007, 04:18 PM

Quote:

Originally Posted by SpaRTan8

A pic of the SRT-4

awww, thats a cute little snail you have there...

I just ordered 4 of these for the 335i!
Do you think we can mod the engine bay to hold these?

12-08-2007, 08:41 PM	#159
Artz 330 Colonel 202 Rep 2,486 Posts Drives: Z4M, 335i, 135i Join Date: Dec 2005 Location: Lawrenceville, NJ iTrader: (4) Garage List 2006 330i [0.00]	damn these calcultors are insane accurate 1/4 mile time: 12.6 Trap Speed: 113 Weight of vehicle with driver (pounds): 3193 (Weighed at local scale with me + 1/8th Tank) Horsepower @ flywheel = 337.53 HP BMW says 330 HP for the M coupe and TMS estimates 7-10 HP Crank for the pulleys so this is pretty accurate. http://www.turnermotorsport.com/imag...e46pullies.jpg __________________
	Appreciate 0 Quote

12-09-2007, 10:18 AM	#160
Artz 330 Colonel 202 Rep 2,486 Posts Drives: Z4M, 335i, 135i Join Date: Dec 2005 Location: Lawrenceville, NJ iTrader: (4) Garage List 2006 330i [0.00]	looks like we got rained out. __________________
	Appreciate 0 Quote

12-09-2007, 11:40 AM	#162
Helix Wildebeest 17 Rep 217 Posts Drives: 2003 Mini TurboKompressor Join Date: Sep 2007 Location: NJ iTrader: (0)	Oh well as soon as Mark is done with work I think we are going to start our intake design.
	Appreciate 0 Quote

12-09-2007, 11:47 AM	#164
Artz 330 Colonel 202 Rep 2,486 Posts Drives: Z4M, 335i, 135i Join Date: Dec 2005 Location: Lawrenceville, NJ iTrader: (4) Garage List 2006 330i [0.00]	LOL I was out on a milk run this morning and stumbled upon a SRT-8 Magnum. Long story short I pulled about 1-1 1/2 Cars on it in the M Coupe. Roads are pretty dry, they should open atco up. __________________
	Appreciate 0 Quote

12-10-2007, 03:44 PM	#170
f1nch New Member 10 Rep 16 Posts Drives: E92 Join Date: Oct 2007 Location: Long Island , NY iTrader: (0)
	Appreciate 0 Quote

12-10-2007, 03:51 PM	#171
DEMENTEch335i New Member 2 Rep 28 Posts Drives: 335 i & S4 Join Date: May 2007 Location: Puerto Rico iTrader: (0)	Did anyone knows if the Helix attache can be reprogramed(Custom map) like PROcede??..
	Appreciate 0 Quote