Fuel-It stage 2 issue : P2A22 code

Redbmwm33 · 07-07-2015, 12:40 AM

Couldn't resolve this issue after 4 attempted installs the issue is still there. this sucks

Redbmwm33 · 07-08-2015, 12:20 AM

Fixed the fuel float issue and still showing low PSI... what do you guys think it is?

Milan · 07-08-2015, 12:30 AM

The connector that goes onto the pump with the green clip...is that seated properly? AKA did the green clip snap in or can you just pull it right back off with your hand?

musc · 07-08-2015, 01:07 AM

I would try resetting ECU/DME adaptations and/or reflashing.

Redbmwm33 · 07-09-2015, 01:42 PM

every connection was installed step by step with Steve AZ reviewing pictures and confirming. All clicks and snaps where heard on my end. Will the flashing do the same as resetting the adaptations?

musc · 07-09-2015, 02:26 PM

Quote:

Originally Posted by artsoasis

every connection was installed step by step with Steve AZ reviewing pictures and confirming. All clicks and snaps where heard on my end. Will the flashing do the same as resetting the adaptations?

No. I'd do both if you can (if I recall I did both when I reflashed to fix my issues).

Redbmwm33 · 07-10-2015, 12:16 AM

Quote:

Originally Posted by musc

No. I'd do both if you can (if I recall I did both when I reflashed to fix my issues).

I tried running the activation fuel pump test and it only gets to 3.9%. The guide says it should be hitting 100%. What would this mean?

07-07-2015, 12:40 AM	#23
Redbmwm33 Lieutenant 103 Rep 558 Posts Drives: Bmw m9 Join Date: Jul 2011 Location: London iTrader: (3)	Couldn't resolve this issue after 4 attempted installs the issue is still there. this sucks
	Appreciate 0 Quote

07-08-2015, 12:20 AM	#24
Redbmwm33 Lieutenant 103 Rep 558 Posts Drives: Bmw m9 Join Date: Jul 2011 Location: London iTrader: (3)	Fixed the fuel float issue and still showing low PSI... what do you guys think it is?
	Appreciate 0 Quote

07-08-2015, 12:30 AM	#25
Milan Captain 202 Rep 663 Posts Drives: F80 M3 Join Date: May 2014 Location: Boise, ID iTrader: (7)	The connector that goes onto the pump with the green clip...is that seated properly? AKA did the green clip snap in or can you just pull it right back off with your hand? __________________ 17 M3 Comp
	Appreciate 0 Quote

07-08-2015, 01:07 AM	#26
musc Free T_e_r_r_Y :) 223 Rep 1,706 Posts Drives: X3MC, Audi TTRS MK3, 335is DCT Join Date: Dec 2006 Location: Charleston, SC iTrader: (9) Garage List 2023 BMW X3MC [10.00] 2011 BMW 335is [10.00]	I would try resetting ECU/DME adaptations and/or reflashing.
	Appreciate 0 Quote

07-09-2015, 01:42 PM	#27
Redbmwm33 Lieutenant 103 Rep 558 Posts Drives: Bmw m9 Join Date: Jul 2011 Location: London iTrader: (3)	every connection was installed step by step with Steve AZ reviewing pictures and confirming. All clicks and snaps where heard on my end. Will the flashing do the same as resetting the adaptations?
	Appreciate 0 Quote