[bena1701]

I have some videos on my phone, I'll post them to youtube later and link here

Originally Posted by hz_diesel

Vids?


Side note has anyone heard the borla s type catback in person? I saw a youtube clip and it sounds like stock... Someone has it on CL for 1k

[hz_diesel]

Originally Posted by bena1701

I have some videos on my phone, I'll post them to youtube later and link here

much appreciated!

[bena1701]

Here you go boss,

The first one is just after it was installed (resonator was left in place), not really broken in yet.

This second is about 2/3 throttle, but I had to get off it before redline as a cop pulled out behind me... Maybe he just liked the sound. Sorry for the portrait video...

I'll try to get a video outside the car this weekend.

Originally Posted by hz_diesel

much appreciated!

[hz_diesel]

Originally Posted by bena1701

Here you go boss,

The first one is just after it was installed (resonator was left in place), not really broken in yet.

This second is about 2/3 throttle, but I had to get off it before redline as a cop pulled out behind me... Maybe he just liked the sound. Sorry for the portrait video...

I'll try to get a video outside the car this weekend.

sounds pretty legit. Better than the other videos I have seen.

[bimmer74]

Originally Posted by Etek

Got the PE I bought from bimmer74 installed on Sat. Maybe it's all in my head but the 1st day seemed like there was a bottleneck like car was struggling. Today I drove around to play tennis and grab lunch and it was normal just a lil bit louder. Also exhaust tip on left sat lower than right. Everything bolted in perfectly but could it be worn mounts to cause 1 side to sit lower?

Funny enough, the right exhaust tip sat a bit low when it was installed on my car. I did notice that one of the rubber mounts on the right had a tear in it so I think that was it. Even my stock exhaust has the same issue. I will replace the mount and hopefully it will help. You may want to check the mounts on your car too.

[willzim]

Given any thought to modifying your stock exhaust to behave like the BMW PE? I just stumbled across someone on FB talking about it so I googled it: http://www.e90post.com/forums/showthread.php?t=739970

Here is a sound clip (dug out from last page of PE mod thread):

[bimmerdreamz]

I have an AE catless and am about 30 minutes South of Boston. Let me know if you wanna listen in.

[hz_diesel]

Anyone have a full catback setup?

[willzim]

I'm going to bring my car to Lou's Custom Exhaust in Salem to do the BMW PE mod and I'll report back on price/sound and what not if I remember

[hz_diesel]

Originally Posted by willzim

I'm going to bring my car to Lou's Custom Exhaust in Salem to do the BMW PE mod and I'll report back on price/sound and what not if I remember

You should ask to watch them do it! also ask if they will reinstall the oem axle in the future for free incase you want to sell or etc.

I asked them for a simple weld for my Legacy to slap on a q300 invida... overall it was a nice job but the weld sucked so much... I had to go back to them and pay to take it off... I did mine in Quincy though, I know the Brockton store is really good.