[Socket]

Originally Posted by DR-JEKL

By memory install for inlets by Advan is over $1000 as its a lot of labour, so if you wish to save some $ definitely do inlets when you do the turbos! Maybe satisfy the power mod bug with a decent e50 tune?

Yep u are right about that DrJ, have you seen any dyno results on inlet addition, talk is 30 hptw but have not seen any evidence

[DR-JEKL]

Originally Posted by Socket

Yep u are right about that DrJ, have you seen any dyno results on inlet addition, talk is 30 hptw but have not seen any evidence

I have, but it was with RB's I believe he added inlets with the same tune/setup and gained say 15-20rwkw?

I'll try and find it and dig it out

He actually gained 25rwkw, he was putting out 350 rwkw, and with the inlets punched out 375

https://www.facebook.com/16617087007...type=1&theater

[Socket]

Originally Posted by DR-JEKL

I have, but it was with RB's I believe he added inlets with the same tune/setup and gained say 15-20rwkw?

I'll try and find it and dig it out

He actually gained 25rwkw, he was putting out 350 rwkw, and with the inlets punched out 375

https://www.facebook.com/16617087007...type=1&theater

Ur da man DrJ. Ur like google, only taller with a renovated kitchen and a beastie 335i

[DR-JEKL]

Originally Posted by Socket

Ur da man DrJ. Ur like google, only taller with a renovated kitchen and a beastie 335i

pfft but I have no $ unlike google

That car punched out 406kw atw last week!!!

[Socket]

Originally Posted by DR-JEKL

pfft but I have no $ unlike google

That car punched out 406kw atw last week!!!

I want that car LOL

[DR-JEKL]

more to come with PI

[AYEDEE]

Wow 406kw? That's insane. Where would we find details on this car?

[DR-JEKL]

Originally Posted by AYEDEE

Wow 406kw? That's insane. Where would we find details on this car?

http://www.1addicts.com/forums/showt...1153268&page=3

[tawfeeqh]

Originally Posted by bmwheath

Thanks guys. I just ordered the hpfp from Schmiedmann for a total of $423 australian delivered (included all fees etc). Can't beat that!
If i was you Socket just order one now. A fresh pump should allow you to run an E65-E70 mix on the E85 backend flash, you will then be able to run map7 and LOTSA POWAAA!! LOL

Hey mate - are these OEM i.e Bosch/ Seimens or are they OEM equivalent. I'm in the process of ordering some Zimmerman drilled rotors, just for looks I guess ($580 AUD delivered for all fronts and rears) and was weighing up whether I should get the pump as well and keep it as spare as my ones haven't been replaced. I'll save a bit on shipping