[lemonpark]

Originally Posted by drZ

and one artsy view..

nice, can i ask where you sourced them from? Varrstoen? or gen?

[drZ]

Originally Posted by MJ80.

Looks awesome mate, what lip is that its epic!

Originally Posted by Socket

That is very very nice
I would also like to know what lip that is and where u got it !!

its the arkym rep Zeig from eurodivision here..fitment is spot on but the shop installing it didnt want to put extra self tapping screws towards the front in fear of going through metalwork etc though i specified to do so. Its just a bit of on the left side due to same.

[drZ]

Originally Posted by lemonpark

nice, can i ask where you sourced them from? Varrstoen? or gen?

they are genuine works from canada was advertised on the forums last year. got them shipped over when aud was still ok. but at the current state I think you're better off sourcing it from jdm concept. it will be around 3.5k mark

[s2kadrenalin]

Don't ask. Just refer to JB4 Assistance SE QLD thread.

[Socket]

OUCH

[sirdaft1]

Originally Posted by s2kadrenalin

Don't ask. Just refer to JB4 Assistance SE QLD thread.

Oh man. That hurts.

[Alen E90]

Originally Posted by Socket

What rims have you got on your ride?
And what rims would you buy next?

My contribution
Current rims

19" OEM style 230
Attachment 1152090

Next rims
Not sure what these are but I think they look clean on the space gray
Attachment 1152091

OP your style 230's look great IMO. These are my favorite OEM wheels!
The wheels in the second pic that you posted are Volk TE37's in Mercury silver

[Socket]

Originally Posted by Alen E90

OP your style 230's look great IMO. These are my favorite OEM wheels!
The wheels in the second pic that you posted are Volk TE37's in Mercury silver

Thanks for that Alen

[Michael BD]

[Socket]

Dem rims go perfect with ur car bornA and the shine you got on the paintwork is super super super glossy. Really nice

[CashedUpBogan]

Question for all, I have a set of 18x9.5 et +20 front, 18x10.5 et +20 rear on the way. I'm on stock suspension rolling on 19 x 8.5 I think all round. Will these fit without rolling guards? Will they poke/rub at all/too much?

[JJH]

Originally Posted by CashedUpBogan

Question for all, I have a set of 18x9.5 et +20 front, 18x10.5 et +20 rear on the way. I'm on stock suspension rolling on 19 x 8.5 I think all round. Will these fit without rolling guards? Will they poke/rub at all/too much?

That's very difficult to say without knowing the actual specs of your current wheels and tyre sizes. Try using this useful calculator at the top of the "Wheels and Tires" section of the forum. Plug in your sizes/offsets and it will tell you the strut side clearance and poke of your new set up > http://www.e90post.com/forums/forumdisplay.php?f=12

[DR-JEKL]

Originally Posted by CashedUpBogan

Question for all, I have a set of 18x9.5 et +20 front, 18x10.5 et +20 rear on the way. I'm on stock suspension rolling on 19 x 8.5 I think all round. Will these fit without rolling guards? Will they poke/rub at all/too much?

Ultimately I would say no you will need sussy work for sure!

9.5" up front is no joke!!! I have a 9" rear rim with high offsets and when I added a 10mm spacer on 265/30 tyres it scrubbed.

With a 9.5" rim up front on soft oem sussy and oem camber I would so no way, but hey I'm an amateur with all that stance stuff!

[CashedUpBogan]

Damn. Wanted to put the wheels on earlier. I'll just have to wait for the airbags to be installed next month

[BRIVN-E92]

Here's my car with GTC Wheels
19x8.5 on the fronts with 19x9.5 with 265 tyres in the rear

[Socket]

Another awesome black car with awesome black wheels !!!!!

U sure u guys just aren't posting the same car over and over?????

My contribution for today haha haa

[Yayoe92]

Oem style 225 M/// wheels

[Socket]

Where did you get them from?

[Yayoe92]

Originally Posted by Socket

Where did you get them from?

I bought them on Craigslist from a 2010 e92 with m package