Adding center channel to XD600/6

e90bmw328i · 08-20-2015, 02:23 PM

I have a Hifi system and replaced the stock AMP with XD600/6v2. Is there a way to add center channel? If so, how is this connected at the AMP? I see technic mentioning something about CDT CS-256 but not much details there on this forum http://www.m3post.com/forums/showthr...0#post16131350 in the very end of first post.

Any suggestions? Should I connect the center channel in parallel with one of the fronts? or do I put the fronts and center in serial and bridge the front channels at the XD600?

Wongway · 08-20-2015, 02:42 PM

I guess my first question is going to be; "Why?"

Your music isn't recorded with a center channel in mind. There's no center channel signal coming from the head unit. Unless I missed that you installed a dolby prologic video system in your car...

jeffb335 · 08-20-2015, 02:51 PM

No, center channels are typically only used when a processor is involved.....something to "create" a center.

kaigoss69 · 08-20-2015, 07:00 PM

Just...don't.

e90bmw328i · 08-20-2015, 07:40 PM

Given all the audio experts are questioning this, it doesnt makes sense to add a center channel without a surround decode, i guess. Thanks for killing the idea

Wongway · 08-20-2015, 07:59 PM

If you really want to spend the money, get something like a Helix DSP and a proper installer to tune the sytem.

They can create the "illusion" of a center channel by properly delaying the left and right sides so that it sounds as if you're getting the information from the "center"

08-20-2015, 02:23 PM	#1
e90bmw328i Lieutenant 39 Rep 407 Posts Drives: 2017 330i Join Date: Aug 2012 Location: Hudson, TX iTrader: (1)	Adding center channel to XD600/6 I have a Hifi system and replaced the stock AMP with XD600/6v2. Is there a way to add center channel? If so, how is this connected at the AMP? I see technic mentioning something about CDT CS-256 but not much details there on this forum http://www.m3post.com/forums/showthr...0#post16131350 in the very end of first post. Any suggestions? Should I connect the center channel in parallel with one of the fronts? or do I put the fronts and center in serial and bridge the front channels at the XD600?
	Appreciate 0 Tweet Quote

08-20-2015, 02:42 PM	#2
Wongway Captain 29 Rep 609 Posts Drives: 328i xdrive Join Date: Sep 2013 Location: Pittsburgh, PA iTrader: (0)	I guess my first question is going to be; "Why?" Your music isn't recorded with a center channel in mind. There's no center channel signal coming from the head unit. Unless I missed that you installed a dolby prologic video system in your car...
	Appreciate 0 Quote

08-20-2015, 02:51 PM	#3
jeffb335 101 Rep 952 Posts Drives: BMW Join Date: Jan 2012 Location: California iTrader: (0)	No, center channels are typically only used when a processor is involved.....something to "create" a center.
	Appreciate 0 Quote

08-20-2015, 07:00 PM	#4
kaigoss69 Brigadier General 301 Rep 3,969 Posts Drives: '08 335i Join Date: Jul 2008 Location: JAX iTrader: (6)	Just...don't. __________________ Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
	Appreciate 0 Quote

08-20-2015, 07:40 PM	#5
e90bmw328i Lieutenant 39 Rep 407 Posts Drives: 2017 330i Join Date: Aug 2012 Location: Hudson, TX iTrader: (1)	Given all the audio experts are questioning this, it doesnt makes sense to add a center channel without a surround decode, i guess. Thanks for killing the idea
	Appreciate 0 Quote

08-20-2015, 07:59 PM	#6
Wongway Captain 29 Rep 609 Posts Drives: 328i xdrive Join Date: Sep 2013 Location: Pittsburgh, PA iTrader: (0)	If you really want to spend the money, get something like a Helix DSP and a proper installer to tune the sytem. They can create the "illusion" of a center channel by properly delaying the left and right sides so that it sounds as if you're getting the information from the "center"
	Appreciate 0 Quote