[_TB_]

I have just retrofitted a CIC, I had a CCC before so it was almost just plug'n'play all the way.

However.. There are a few nags.

1) PDC image only shows the rear sensor, but I have sensors front and rear. The beeping works both front and back - but not the visual PDC.

2) There is no option in the CIC to map the two buttons (star and diamond) on the steeringwheel.

3) Navigation voice - I'm not able to turn the navigation voice down, nor up.

4) I have a snapinadapter for an iPhone4 - can I not play music from it directly from the snapin adapter? Aux in and USB works just fine. But I had hoped that I could play internet radio through the iphone in the snapin adapter.

5) I have an option called "Internet" under "BMW Services". But the following message: "Online services not enabled or contract expired". if I replace the SIM - can I use this "Internet"?

6) Voice control is not working.


I'm not running an emulator - Navigation is working, does that mean I can update the maps with a FSC code for my car? Or do I need to update the maps otherwise?


My car has the following options (plus others I do not think are important here)

- PDC front and rear, S508A
- Rainsensor, S521A
- Adaptive Xenon headlighst, S524A+S522A
- BMW Assist, S612A
- BMW Online, S616A
- BMW Teleservice, S6AAA
- Voice Control, S620A
- Comfort Access, S322A
- Professional HIFI, S676A
- USB/AUX, S6FLA
- Navigation BT, S7SPA
- Mobile phone prep., S633A
- Telemetrics, S8SCA

[ctuna]

You might want to ask this at the idrive forum as well

http://www.e90post.com/forums/forumdisplay.php?f=122

and coding forum.

[reisf]

Yeah you will need to code it.

With NCS Expert add VO option $609 and then use job "SG_CODIEREN" on the CIC module. If your vehicle is older than September 2009, you will have to change your production date as well. (I think its September 2009 - #0909 anyway)