Car won't start now.

Boganian Rubes · 09-09-2015, 03:54 AM

So I removed the top stuff of one of the injectors so I could have a look at what it looks like, then I replaced everything and tightened... Now the car wot start

iliketurtl3s · 09-09-2015, 04:17 AM

GG

Boganian Rubes · 09-09-2015, 04:20 AM

Quote:

Originally Posted by iliketurtl3s

GG

Ikr wth

Scotty89 · 09-09-2015, 04:33 AM

So, it does absolutely nothing? or it cranks over but won't start running?

Since you fiddled with the injectors, I'd guess it's going to be a fuel delivery problem. Start trouble shooting there.

Boganian Rubes · 09-09-2015, 04:34 AM

Quote:

Originally Posted by Scotty89

So, it does absolutely nothing? or it cranks over but won't start running?

Since you fiddled with the injectors, I'd guess it's going to be a fuel delivery problem. Start trouble shooting there.

It cranks over but won't run, it'll crank until I take my foot off the brake. Odd, odd and retardedly odd. How does fuel delivery troubleshooting go?

_ink · 09-09-2015, 04:55 AM

Not re-wired correctly?

Did you change the injectors?

Boganian Rubes · 09-09-2015, 05:13 AM

No, I only took the connectors off of one of the injectors to get a better look at it, then reconnected it.

Boganian Rubes · 09-09-2015, 05:34 AM

Did I look at them wrong or something

vtl · 09-09-2015, 06:11 AM

Are you sure you plugged them in properly and all the way? Last time I installed ignition coils and started the car, I was running on 4-5 cylinders cos the locking tabs clicked in but the connectors weren't in all the way.

Even so, I would have thought even without fuel on 1 cylinder the car should still start up and just run rough though?

I think your best bet is to go back and look for anything that fell out or loose/broken connections.

Boganian Rubes · 09-09-2015, 06:26 AM

IT'S ALIVE! Luckily my neighbour is the head mechanic at Audi lol. He came over and had a look, all he did was pull out the pressure regulator, and ten the car started after about 5 seconds of cranking, and then he reinstalled it and all was good.

AYEDEE · 09-09-2015, 07:32 AM

Damm I was going to troll you and tell you that you ruined it and that you'd need a rebuild... haha anyway glad it's working

Boganian Rubes · 09-09-2015, 07:49 AM

Hahaha man I think I would of believed you!

09-09-2015, 03:54 AM	#1
Boganian Rubes Lieutenant Coal Burner 162 Rep 1,639 Posts Drives: 2008 BMW 320d e90 Join Date: Aug 2015 Location: Australia, Melbourne iTrader: (0)	Car won't start now. So I removed the top stuff of one of the injectors so I could have a look at what it looks like, then I replaced everything and tightened... Now the car wot start
	Appreciate 0 Tweet Quote

09-09-2015, 04:17 AM	#2
iliketurtl3s Captain 73 Rep 946 Posts Drives: BMW Join Date: Jul 2015 Location: Melbourne iTrader: (0)	GG
	Appreciate 0 Quote

09-09-2015, 04:33 AM	#4
Scotty89 Buy a 335 they said... It'll be fun they said... 118 Rep 995 Posts Drives: 2007 E92 335i Join Date: Jun 2014 Location: Melbourne, Australia iTrader: (0) Garage List 2007 BMW 335i [10.00]	So, it does absolutely nothing? or it cranks over but won't start running? Since you fiddled with the injectors, I'd guess it's going to be a fuel delivery problem. Start trouble shooting there.
	Appreciate 0 Quote

09-09-2015, 04:55 AM	#6
_ink Jedi samurai ninja turtle 636 Rep 3,021 Posts Drives: X3 M40i 2018 Join Date: May 2012 Location: Sydney, Australia iTrader: (0) Garage List 2018 X3 M40i [0.00]	Not re-wired correctly? Did you change the injectors?
	Appreciate 0 Quote

09-09-2015, 05:13 AM	#7
Boganian Rubes Lieutenant Coal Burner 162 Rep 1,639 Posts Drives: 2008 BMW 320d e90 Join Date: Aug 2015 Location: Australia, Melbourne iTrader: (0)	No, I only took the connectors off of one of the injectors to get a better look at it, then reconnected it.
	Appreciate 0 Quote

09-09-2015, 05:34 AM	#8
Boganian Rubes Lieutenant Coal Burner 162 Rep 1,639 Posts Drives: 2008 BMW 320d e90 Join Date: Aug 2015 Location: Australia, Melbourne iTrader: (0)	Did I look at them wrong or something
	Appreciate 0 Quote

09-09-2015, 06:11 AM	#9
vtl Brigadier General 1508 Rep 3,148 Posts Drives: 2008 BMW 135i MT Join Date: Apr 2015 Location: Melbourne, Australia iTrader: (0)	Are you sure you plugged them in properly and all the way? Last time I installed ignition coils and started the car, I was running on 4-5 cylinders cos the locking tabs clicked in but the connectors weren't in all the way. Even so, I would have thought even without fuel on 1 cylinder the car should still start up and just run rough though? I think your best bet is to go back and look for anything that fell out or loose/broken connections. __________________ Build Thread
	Appreciate 0 Quote

09-09-2015, 06:26 AM	#10
Boganian Rubes Lieutenant Coal Burner 162 Rep 1,639 Posts Drives: 2008 BMW 320d e90 Join Date: Aug 2015 Location: Australia, Melbourne iTrader: (0)	IT'S ALIVE! Luckily my neighbour is the head mechanic at Audi lol. He came over and had a look, all he did was pull out the pressure regulator, and ten the car started after about 5 seconds of cranking, and then he reinstalled it and all was good.
	Appreciate 0 Quote

09-09-2015, 07:32 AM	#11
AYEDEE Captain 57 Rep 936 Posts Drives: 3 Series BMW Join Date: Oct 2013 Location: NSW iTrader: (0)	Damm I was going to troll you and tell you that you ruined it and that you'd need a rebuild... haha anyway glad it's working
	Appreciate 0 Quote

09-09-2015, 07:49 AM	#12
Boganian Rubes Lieutenant Coal Burner 162 Rep 1,639 Posts Drives: 2008 BMW 320d e90 Join Date: Aug 2015 Location: Australia, Melbourne iTrader: (0)	Hahaha man I think I would of believed you!
	Appreciate 0 Quote