SOLD ECS Boost gauge kit

harms · 09-04-2015, 04:11 AM

Quote:

Originally Posted by iliketurtl3s

if you got a video bro - id be keen

ECS have their own videos. But if you want to check it out in real life let me know

iliketurtl3s · 09-04-2015, 04:38 AM

yeah but the angle of the vent is an issue no ?

harms · 09-04-2015, 06:39 PM

Quote:

Originally Posted by iliketurtl3s

yeah but the angle of the vent is an issue no ?

To me it is, but I'm a borderline obsessive compulsive.

But to be fair, now that I've has this gauge installed for a little while it doesn't bother me nearly as much.

iliketurtl3s · 09-04-2015, 11:32 PM

Quote:

Originally Posted by harms

To me it is, but I'm a borderline obsessive compulsive.

But to be fair, now that I've has this gauge installed for a little while it doesn't bother me nearly as much.

bit like herpes i guess - at the start its annoying... later u get used to it.

Ghent · 09-07-2015, 12:25 AM

is this still available? Will fit an N55? Their website doesn't state this clearly

Socket · 09-07-2015, 05:40 AM

Quote:

Originally Posted by Ghent

is this still available? Will fit an N55? Their website doesn't state this clearly

Sorry won't fit N55

If you trawl through the fine print it reads

For E9X 3 Series models, please see our innovative Vent Pod Boost Gauge Kits for an easy, clean install. Will not work on N55 motor vehicles

Ghent · 09-07-2015, 09:00 PM

Quote:

Originally Posted by Socket

Sorry won't fit N55

If you trawl through the fine print it reads

For E9X 3 Series models, please see our innovative Vent Pod Boost Gauge Kits for an easy, clean install. Will not work on N55 motor vehicles

well that sucks

I would have picked it up right away... in the market for a boost gauge

naynay · 09-07-2015, 11:07 PM

why not socket? isnt it a mechanical gauge? unless the dash trim is completely different.

harms · 09-08-2015, 01:24 AM

I believe N55 have an electronic DV so no accessible vacuum lines to T into. You can tap into the manifold though but not as easy.

vtl · 09-08-2015, 01:34 AM

I suppose if you had an aftermarket charge pipe with an unused meth bung you could tap off that. Wont fit his car since its a 135i with a different vent anyway.

Socket · 09-08-2015, 02:52 AM

Quote:

Originally Posted by naynay

why not socket? isnt it a mechanical gauge? unless the dash trim is completely different.

As per Harnsy and Vts comments. The gauge fits into a specially design holder that replaces the air vent so only fits E9x

naynay · 09-08-2015, 03:03 AM

ohh i didnt read his profile. cause in the post he only stated n55

Mayuri Krab · 09-08-2015, 12:18 PM

Interested, how much is postage to WA postcode 6036?

The lack of boost gauge in this car irate me, fitment seems fine to me, I a bunch of gauges stuck on using double sided tape for my R33 LOL

Socket · 09-08-2015, 05:23 PM

Quote:

Originally Posted by Mayuri Krab

Interested, how much is postage to WA postcode 6036?

The lack of boost gauge in this car irate me, fitment seems fine to me, I a bunch of gauges stuck on using double sided tape for my R33 LOL

I'll cover the postage MK

Mayuri Krab · 09-09-2015, 04:34 PM

Quote:

Originally Posted by Socket

I'll cover the postage MK

Deal

PM your bank payment details and I'll get to it this weekend.

Socket · 09-09-2015, 04:55 PM

Quote:

Originally Posted by Mayuri Krab

Deal

PM your bank payment details and I'll get to it this weekend.

No problem I'll send the details Friday night

Ghent · 09-09-2015, 11:03 PM

Quote:

Originally Posted by naynay

ohh i didnt read his profile. cause in the post he only stated n55

If it had fit I would have modified a vent to hold it

naynay · 09-10-2015, 02:55 AM

thank me later

http://www.shadowmotor.com.tw/en/category/A01.html

Mayuri Krab · 09-21-2015, 11:12 AM

Item arrived, cheers.

Socket · 09-21-2015, 04:58 PM

Quote:

Originally Posted by Mayuri Krab

Item arrived, cheers.

Sweet. Pics when u get it installed Mk

Mayuri Krab · 09-24-2015, 11:57 AM

Quote:

Originally Posted by Socket

Sweet. Pics when u get it installed Mk

Probably be a while, gonna pay someone to install it...

Too much of a noob.

Socket · 09-25-2015, 01:19 AM

Quote:

Originally Posted by Mayuri Krab

Probably be a while, gonna pay someone to install it...

Too much of a noob.

lol same here mate

09-04-2015, 04:38 AM	#24
iliketurtl3s Captain 73 Rep 946 Posts Drives: BMW Join Date: Jul 2015 Location: Melbourne iTrader: (0)	yeah but the angle of the vent is an issue no ?
	Appreciate 0 Quote

09-07-2015, 12:25 AM	#27
Ghent Topless Speed 20 Rep 158 Posts Drives: 2013 135i M Sport Convertible Join Date: Mar 2014 Location: Australia iTrader: (0)	is this still available? Will fit an N55? Their website doesn't state this clearly __________________ -------------------------------------------------------------- 2013 135i M Sport Convertible JB4, DP, FMIC, BMS Meth & E85. Quafle LSD 3.46
	Appreciate 0 Quote

09-07-2015, 11:07 PM	#30
naynay Banned 181 Rep 1,426 Posts Drives: 2006 E92 335i FBO Join Date: May 2013 Location: Melbourne Australia iTrader: (0)	why not socket? isnt it a mechanical gauge? unless the dash trim is completely different.
	Appreciate 0 Quote

09-08-2015, 01:24 AM	#31
harms Captain 77 Rep 605 Posts Drives: 335i Join Date: Jul 2014 Location: Australia iTrader: (0)	I believe N55 have an electronic DV so no accessible vacuum lines to T into. You can tap into the manifold though but not as easy.
	Appreciate 0 Quote

09-08-2015, 01:34 AM	#32
vtl Brigadier General 1507 Rep 3,148 Posts Drives: 2008 BMW 135i MT Join Date: Apr 2015 Location: Melbourne, Australia iTrader: (0)	I suppose if you had an aftermarket charge pipe with an unused meth bung you could tap off that. Wont fit his car since its a 135i with a different vent anyway. __________________ Build Thread
	Appreciate 0 Quote

09-08-2015, 03:03 AM	#34
naynay Banned 181 Rep 1,426 Posts Drives: 2006 E92 335i FBO Join Date: May 2013 Location: Melbourne Australia iTrader: (0)	ohh i didnt read his profile. cause in the post he only stated n55
	Appreciate 0 Quote

09-08-2015, 12:18 PM	#35
Mayuri Krab The Cheap Arse Asian 47 Rep 585 Posts Drives: E90 335i & R33 Skyline GTS-T Join Date: Jun 2013 Location: Perth, Australia iTrader: (0)	Interested, how much is postage to WA postcode 6036? The lack of boost gauge in this car irate me, fitment seems fine to me, I a bunch of gauges stuck on using double sided tape for my R33 LOL __________________ 07 BMW E90 335i \|JB4 + MHD Backend Flash (Pump) \|AR Catless DPs\|ER CP + Forge DVs\|BMS DCIs + OCC\|RB PCV valve + cap\| 93 R33 Skyline GTS-T \|SAFC-II piggyback\|3" Turbo Back Exhaust + Highflow Cat\|FMIC\|Boost Tee\|Apexi POD\| Shitty Chinese spec tires = sideways action everywhere
	Appreciate 0 Quote

09-10-2015, 02:55 AM	#40
naynay Banned 181 Rep 1,426 Posts Drives: 2006 E92 335i FBO Join Date: May 2013 Location: Melbourne Australia iTrader: (0)	thank me later http://www.shadowmotor.com.tw/en/category/A01.html
	Appreciate 0 Quote

09-21-2015, 11:12 AM	#41
Mayuri Krab The Cheap Arse Asian 47 Rep 585 Posts Drives: E90 335i & R33 Skyline GTS-T Join Date: Jun 2013 Location: Perth, Australia iTrader: (0)	Item arrived, cheers.
	Appreciate 0 Quote