|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Cooling System & Auto Box Capacity
|
|
11-26-2015, 07:20 AM | #1 |
Private First Class
60
Rep 162
Posts |
Cooling System & Auto Box Capacity
Gents just checking if someone happens to know the following for my 320D
Total capacity of the cooling system. I assume after the system has been drained I need to refill 50/50 water/coolant Total capacity of the auto 6 speed box. I was informed the oil in the T/C will remain so I would like to know what quantity of oil I need to order and about how much remains in the T/Q. My car has very low KM but is coming up for 5 years old so my plan is only to change the oil and leave the filter. Does this sound ok or should I also change the filter. I am from the old school and not interested in leaving the same fluid in a vehicle for a very long period. |
11-26-2015, 07:42 AM | #2 |
Lieutenant Colonel
169
Rep 1,596
Posts |
Just change everything. No point having it all apart for the oil change and not doing the filter/sleeve/sump etc. You can buy a kit with all the bits required.
|
Appreciate
0
|
11-26-2015, 09:46 AM | #3 | |
Private First Class
60
Rep 162
Posts |
Quote:
On the sump there is a drain plug and on the box housing there is a level plug. I am not sure what you mean when its all apart for the oil change ? Would you have any link for the cooling and auto box capacity for my 320D |
|
Appreciate
0
|
Bookmarks |
|
|