:? E90 Aftermarket Radio Install Tip?

liepajasbetons · 12-31-2015, 06:44 AM

Hello! I need the simplest temporary solution to connect common Pioneer head unit and 2007 e90 HI FI sound system. Need just sound no steer. controls ect. So my question is how to connect OEM e90 HI FI amp and aftermarket radio correctly.

OEM CCC radio (old unit) connector --- to ---> common Pioneer head unit

Is it enough just to buy wire adapters link1 and link 2 and just plug and play.

In this case only speaker outs are used from aftermarket unit. Could that damage the OEM amp?

or I need to use also low RCA to OEM amp?

I would appreciate any info on this...

ctuna · 12-31-2015, 12:23 PM

taibanl · 12-31-2015, 01:45 PM

Either contact for a member technic, or use a connects2 harness

bmw325i · 12-31-2015, 07:53 PM

Connects2 harness, you'll need to modify it to use the rca outputs instead of speaker level outputs.

liepajasbetons · 01-01-2016, 05:24 AM

Quote:

Originally Posted by bmw325i

Connects2 harness, you'll need to modify it to use the rca outputs instead of speaker level outputs.

I just need to find RCA wire in adapter and make connection? Is there any diagramm?

bmw325i · 01-01-2016, 06:08 PM

This is the harness you should use
https://www.dynamicsounds.co.uk/bmw-...n-support.html

You'll need to cut off the iso connectors and splice it into your pioneer harness. I recomend using solder and heatshrink so you won't have issues down the road. Instead of using the speaker level outs from the pioneer harness use this to connect to the rca outputs you'll need 2 of them.

http://www.sonicelectronix.com/item_...te-RFI2SW.html

Your steering wheel controls will work no programming required. You might lose chimes depending on the year of your car. Early builds have a seperate speaker for chimes. There is a different connects2 harness you could use if your chimes play through the stereo system and you want to keep them.

liepajasbetons · 01-02-2016, 06:19 AM

Quote:

Originally Posted by bmw325i

This is the harness you should use
https://www.dynamicsounds.co.uk/bmw-...n-support.html

You'll need to cut off the iso connectors and splice it into your pioneer harness. I recomend using solder and heatshrink so you won't have issues down the road. Instead of using the speaker level outs from the pioneer harness use this to connect to the rca outputs you'll need 2 of them.

http://www.sonicelectronix.com/item_...te-RFI2SW.html

Your steering wheel controls will work no programming required. You might lose chimes depending on the year of your car. Early builds have a seperate speaker for chimes. There is a different connects2 harness you could use if your chimes play through the stereo system and you want to keep them.

Thank you a lot... just what I was looking for

ctuna · 01-02-2016, 05:09 PM

If you are doing this to an idrive car you are going to have
a big mess.

bmw325i · 01-03-2016, 09:19 AM

Quote:

Originally Posted by ctuna

If you are doing this to an idrive car you are going to have
a big mess.

I'm not sure if the connections are any different with idrive. Mathematics had idrive and swapped his head unit. He modified the idrive screen to make it functional though so it is a clean install.

Edit- I just did a quick search and idrive uses the same quadralock connector so the install isn't much different. I agree there is probably extra wiring in the way and then you'll have a non functioning idrive controller and screen.

ctuna · 01-03-2016, 01:02 PM

Ok you remove the idrive and you have dead screen
in the middle of the dash and dead idrive contoller on the
center console that's the mess . Plus the usual we can't fix
it or upgrade the software without the original stuff installed
from BMW . Thats the mess not that you can't hook it up.

12-31-2015, 06:44 AM	#1
liepajasbetons New Member 1 Rep 9 Posts Drives: e90 Join Date: Sep 2015 Location: Latvia iTrader: (0)	:? E90 Aftermarket Radio Install Tip? Hello! I need the simplest temporary solution to connect common Pioneer head unit and 2007 e90 HI FI sound system. Need just sound no steer. controls ect. So my question is how to connect OEM e90 HI FI amp and aftermarket radio correctly. OEM CCC radio (old unit) connector --- to ---> common Pioneer head unit Is it enough just to buy wire adapters link1 and link 2 and just plug and play. In this case only speaker outs are used from aftermarket unit. Could that damage the OEM amp? or I need to use also low RCA to OEM amp? I would appreciate any info on this...
	Appreciate 0 Tweet Quote

12-31-2015, 12:23 PM	#2
ctuna Lieutenant General 2045 Rep 13,364 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	FYI head unit http://www.e90post.com/forums/showth...ight=head+unit http://www.e90post.com/forums/showthread.php?t=1036190 http://www.e90post.com/forums/showth...hlight=dynavin http://www.janus-design.net/english/ http://www.e90post.com/forums/showthread.php?t=355089 http://www.e90post.com/forums/showth...ight=head+unit http://www.e90post.com/forums/showth...hlight=dynavin http://www.e90post.com/forums/showth...hlight=dynavin http://www.e90post.com/forums/showth...light=retrofit http://www.e90post.com/forums/showthread.php?t=993447 http://www.e90post.com/forums/showthread.php?t=1016187 http://www.e90post.com/forums/showth...hlight=dynavin
	Appreciate 0 Quote

12-31-2015, 01:45 PM	#3
taibanl Brigadier General 281 Rep 4,121 Posts Drives: BMW Join Date: Sep 2010 Location: NA iTrader: (4)	Either contact for a member technic, or use a connects2 harness
	Appreciate 0 Quote

12-31-2015, 07:53 PM	#4
bmw325i Major General 237 Rep 5,118 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	Connects2 harness, you'll need to modify it to use the rca outputs instead of speaker level outputs.
	Appreciate 0 Quote

01-01-2016, 06:08 PM	#6
bmw325i Major General 237 Rep 5,118 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	This is the harness you should use https://www.dynamicsounds.co.uk/bmw-...n-support.html You'll need to cut off the iso connectors and splice it into your pioneer harness. I recomend using solder and heatshrink so you won't have issues down the road. Instead of using the speaker level outs from the pioneer harness use this to connect to the rca outputs you'll need 2 of them. http://www.sonicelectronix.com/item_...te-RFI2SW.html Your steering wheel controls will work no programming required. You might lose chimes depending on the year of your car. Early builds have a seperate speaker for chimes. There is a different connects2 harness you could use if your chimes play through the stereo system and you want to keep them.
	Appreciate 0 Quote

01-02-2016, 05:09 PM	#8
ctuna Lieutenant General 2045 Rep 13,364 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	If you are doing this to an idrive car If you are doing this to an idrive car you are going to have a big mess.
	Appreciate 0 Quote

01-03-2016, 01:02 PM	#10
ctuna Lieutenant General 2045 Rep 13,364 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Ok you remove the idrive and you have dead screen Ok you remove the idrive and you have dead screen in the middle of the dash and dead idrive contoller on the center console that's the mess . Plus the usual we can't fix it or upgrade the software without the original stuff installed from BMW . Thats the mess not that you can't hook it up.
	Appreciate 0 Quote