[singhr]

I am planning to replace my OEM H8 angel eye bulbs (2011 328i e90 LCI Xenon) with the widely available LED aftermarket replacements. But I would like to DISCARD the resistor which is used for current draw and preventing the car from throwing DRL errors. My goal is to eliminate the resistor as a heat source and have better, more efficient lighting in place of the stock H8 bulbs.

So what parameters in the NRFM do I code out to prevent the hot and cold DRL checks? I see all kinds of hot/cold checks in the Code List sheet but nothing specific to the DRL/Angel eyes.

[singhr]

Ok - I should have searched more before posting

I found the following to be coded out to eliminate any Angel eye errors:

FEHLERMELDUNG_CC_SL_V_L
FEHLERMELDUNG_CC_SL_V_R
KALTUEBERWACHUNG_SL_V_L
KALTUEBERWACHUNG_SL_V_R
WARMUEBERWACHUNG_SL_V_L
WARMUEBERWACHUNG_SL_V_R

Can some gurus please confirm and if I am going to create any other unforseen issues? Thanks!

[Jozy]

No problem. You are turning off failure message, cold check and hot check for both left and right side lights (AE)

What kind of problems can it cause?