[Jnguye15]

If that's already an oil cooler, how come bms sells that oil cooler valve?

[sd306]

Originally Posted by Jnguye15

If that's already an oil cooler, how come bms sells that oil cooler valve?

Your oil cooler is only used part of the time to cool the oil. It's controlled by a valve and spring. BMS's oil cooler valve replaces the stock oil cooler valve and spring to force the oil cooler to be used 100% of the time. I have AD-Engineering's see my sig and search for my review on them.

[BKBMW335I]

Originally Posted by Jnguye15

Hi. I have a 2011 e92 335i xdrive (auto). Mods are Cobb cp, 4"down pipe, muffler delete, jb4, and bms intake. Not sure what I should buy next. I was thinking about a fmic or meth to help with the engine heat soaking, but then I was also thinking about doing a full exhaust system or oil cooler and catch can..
Thanks in advance!

Also.. Which map on my jb4 should I be running? I've been switching back and fourth between map 2 and map 5.

FMIC first and then do Inlets and outlets and either a DV or a BOV.