|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Rear roll over strut / axle mount loose?
|
|
04-26-2016, 10:39 PM | #1 |
Private
10
Rep 59
Posts |
Rear roll over strut / axle mount loose?
I have a 2008 328xi, noticed a small issue on the right side (passenger) when jacking the car up to replace the water pump:
According to RealOEM it's the rear roll over strut, item 4 in pic: http://www.realoem.com/bmw/enUS/show...diagId=33_1230 Should this simply be tightened or should some suspension components be replaced? I can feel a slight vibration ~60 mph. It was worse with poorer tires. Last edited by bvanderhaar; 04-26-2016 at 10:44 PM.. |
04-27-2016, 07:43 PM | #2 |
Private
20
Rep 77
Posts |
If you can get it tight - OK, but you might have to replace item 9 in this pic:
http://www.realoem.com/bmw/enUS/show...diagId=33_1229 |
Appreciate
0
|
04-27-2016, 08:52 PM | #3 |
Private
10
Rep 59
Posts |
I looked at it again, and it looks similar to the other one; maybe it was my perspective, or maybe it's slightly bent. I'm going to leave it alone for now.
|
Appreciate
0
|
Bookmarks |
|
|