Anybody used a 1M map on 335i?

Rory · 04-29-2016, 02:23 PM

As per subject, I was wondering if anybody had used a 1M map on a 335i? Is this possible, I guess it would have meant copying parameters over onto a 335i BIN.

I was just thinking it must be a very smooth and safe 360bhp map if bmw themselves made it ?

Sorry if this is a stupid question, did a search and couldn't find anything.

Kevinl · 04-29-2016, 09:56 PM

It would be 335 horsepower and the bmw PPK tune should be similar

I'm sure wedge or buraq would have an even smoother tune since they are not limited like bmw would be

bradsm87 · 04-29-2016, 10:54 PM

PPK/335IS/1M tunes all look the same in terms of the tables used for tuning. The only differences are vehicle, transmission and region specific stuff.

PPK for your car with the power level coding check disabled is the way to do it. If you have downpipes, disable the cat conversion codes and knock 4% off the WGDC base and WGDC Base (Spool) tables.

There is really no harm in pushing things a bit further though.

04-29-2016, 02:23 PM	#1
Rory Lieutenant 97 Rep 299 Posts Drives: E92 335i SE 6MT Join Date: Aug 2013 Location: Lanarkshire, Scotland iTrader: (0) Garage List 2005 Z4 3.0 6MT [0.00] 2007 335i 6MT [0.00]	Anybody used a 1M map on 335i? As per subject, I was wondering if anybody had used a 1M map on a 335i? Is this possible, I guess it would have meant copying parameters over onto a 335i BIN. I was just thinking it must be a very smooth and safe 360bhp map if bmw themselves made it ? Sorry if this is a stupid question, did a search and couldn't find anything. __________________ 2007 E92 335i 6MT \| MHD Stage 1 + \| Mishimoto Intercooler \| Z4 Airbox mod
	Appreciate 0 Tweet Quote

04-29-2016, 09:56 PM	#2
Kevinl Lieutenant 229 Rep 567 Posts Drives: 2017 BMW M3 Alpine White 6MT Join Date: Aug 2014 Location: Phoenix iTrader: (0)	It would be 335 horsepower and the bmw PPK tune should be similar I'm sure wedge or buraq would have an even smoother tune since they are not limited like bmw would be
	Appreciate 0 Quote

04-29-2016, 10:54 PM	#3
bradsm87 Lieutenant Colonel 603 Rep 1,693 Posts Drives: F25 LCI xDrive30d Join Date: Jun 2013 Location: Australia iTrader: (0)	PPK/335IS/1M tunes all look the same in terms of the tables used for tuning. The only differences are vehicle, transmission and region specific stuff. PPK for your car with the power level coding check disabled is the way to do it. If you have downpipes, disable the cat conversion codes and knock 4% off the WGDC base and WGDC Base (Spool) tables. There is really no harm in pushing things a bit further though.
	Appreciate 0 Quote