[3000GT MR]

Originally Posted by Island Road

Do you already have the Motiv Clutch in installed, if so how was it compared to your Spec 3+?

nope not yet. First week of January i expect to have it installed

[loesch]

Originally Posted by 3000GT MR

nope not yet. First week of January i expect to have it installed

Bumping an old thread. I'm curious what others think of the twin disk clutch. How do you like it? Compared to Spec 3+?

[Brule]

Mines good.
Its the full face.

Installed and clutch the bite was right at the floor now its up the same or slightly below stock.

Absolute bitch to bleed.

Street use is fine slightly heavier maybe 20% harder to push the clutch down. Car shutters more in 1st reverse. Whole car vibrates when theres mild load between 2-3k rpm. Especially 4-5-6

Easy to drive around town, gears slip in like stock.

With ac on the flywheel rattles a fair bit, no ac its nearly silent.

Overall ild be going a oem style under 500 hp because of the rattles and vibrations.

Once your over 500 get the twin plate or see if mfactory twin plate is any good.

[Julian2485]

Originally Posted by Brule

Mines good.
Its the full face.

Installed and clutch the bite was right at the floor now its up the same or slightly below stock.

Absolute bitch to bleed.

Street use is fine slightly heavier maybe 20% harder to push the clutch down. Car shutters more in 1st reverse. Whole car vibrates when theres mild load between 2-3k rpm. Especially 4-5-6

Easy to drive around town, gears slip in like stock.

With ac on the flywheel rattles a fair bit, no ac its nearly silent.

Overall ild be going a oem style under 500 hp because of the rattles and vibrations.

Once your over 500 get the twin plate or see if mfactory twin plate is any good.

Did you raise your idle