Jb4 power wire.

Jake335is · 05-06-2016, 01:20 AM

l'm about to install my new/used Jb4, and i just noticed my power wire looks different then what i have seen on this forum. Am i missing something if so can i still do the install?

Edit: crap N55 page sorry about that..

Thanks

Manberg · 05-06-2016, 01:58 AM

If nothing else, just cut that end off and go down to the hardware store and buy a suitable crimp connection that will do the job. I know the n55 one just mounts under a strut nut. Doesn't really have to be pretty to work, just make sure it has good contact.

05-06-2016, 01:20 AM	#1
Jake335is Private 64 Rep 75 Posts Drives: 2011 335is Join Date: Mar 2016 Location: Colorado iTrader: (1)	Jb4 power wire. l'm about to install my new/used Jb4, and i just noticed my power wire looks different then what i have seen on this forum. Am i missing something if so can i still do the install? Edit: crap N55 page sorry about that.. Thanks Last edited by Jake335is; 05-06-2016 at 01:44 AM..
	Appreciate 0 Tweet Quote

05-06-2016, 01:58 AM	#2
Manberg Second Lieutenant 89 Rep 239 Posts Drives: 2011 e90 335i Join Date: Aug 2013 Location: SoCal iTrader: (0)	If nothing else, just cut that end off and go down to the hardware store and buy a suitable crimp connection that will do the job. I know the n55 one just mounts under a strut nut. Doesn't really have to be pretty to work, just make sure it has good contact. __________________ M-Sport, 6MT, PPK, JB4 ISO + Rev.3, VRSF 7'' FMIC, VRSF Catless DP, BMS Charge Pipe, MFactory LSD, Öhlins R&T, M3 Control Arms, Rogue 6MT Bushings, Remus Exhaust, Duke Dynamics CF Diffuser, Cyba Scoops, VMR VB3 19s, BMS Clucth Stop
	Appreciate 1 Quote