[stote]

Hi hope someone can help me here , i retrofitted the lci tail led lights in my e91 , i used ncs expert to export the file to my laptop m now i searched the net but there is so much info that i got confused , does anyone can tell me what lines do i have to change to nicht_aktiv so that my lights stop blinking

Regards
Sergio

[asha]

No tech wizard but i did this with the carly app on my car and believe you have to eliminate your rear light bulb checks

[Sensible_]

Read this entire thread:

http://www.e90post.com/forums/showthread.php?t=553832

In short it depends on what FRM version you have.

FRM1 (FA) - Diasble warm and cold bulb checks only way.

FRM2 and 3 - Add the correct VO LED option to the FA string for CAS and NFRM, then recode module to default

[stote]

Originally Posted by Sensible_

Read this entire thread:

http://www.e90post.com/forums/showthread.php?t=553832

In short it depends on what FRM version you have.

FRM1 (FA) - Diasble warm and cold bulb checks only way.

FRM2 and 3 - Add the correct VO LED option to the FA string for CAS and NFRM, then recode module to default

Thanks , today I managed to code them with ncs expert

Thanks for the help