E9X 335xi Vehicle needed for test fitment R&D in Fresno, CA Area

jaserion · 01-20-2008, 04:48 PM

Just reposting it here in hopes that someone will help us, xi guys, out. Thanks!

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Hi Guys,

So as you may now, we've been pushing to get an E9X sway bar made for the xi platform. So I've been told to request an E9X 335xi vehicle for test fitment/R&D in the Fresno, CA Area.

So if you are in the area, or dont mind dropping your car off for most of the day there then send me an E-mail - Ron************.com(Do not PM Me for this!!)

Compensation - when the final model comes out you'll get sway bars for your car for free. Also you'll be helping out the community on getting these made.

Thank you.

Original thread here!

flukey · 01-23-2008, 04:21 PM

BUMP!

01-20-2008, 04:48 PM	#1
jaserion Captain 123 Rep 973 Posts Drives: BMW Onsh'mo... Join Date: Nov 2007 Location: New York iTrader: (0)	E9X 335xi Vehicle needed for test fitment R&D in Fresno, CA Area Just reposting it here in hopes that someone will help us, xi guys, out. Thanks! -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Hi Guys, So as you may now, we've been pushing to get an E9X sway bar made for the xi platform. So I've been told to request an E9X 335xi vehicle for test fitment/R&D in the Fresno, CA Area. So if you are in the area, or dont mind dropping your car off for most of the day there then send me an E-mail - Ron************.com(Do not PM Me for this!!) Compensation - when the final model comes out you'll get sway bars for your car for free. Also you'll be helping out the community on getting these made. Thank you. Original thread here!
	Appreciate 0 Tweet Quote

01-23-2008, 04:21 PM	#2
flukey Go big or go home! 53 Rep 948 Posts Drives: E90 335xi Join Date: Jun 2007 Location: Iowa iTrader: (9)	BUMP!
	Appreciate 0 Quote