Can't code new angel eyes with Carly. Help. Remote code me $$$?

Torgus · 07-24-2016, 09:31 AM

Got some custom headlights with aftermarket angel eyes. Passenger side angel eye turns off after 10 seconds, driver's side is fine. I have carly but can't seem to get it to code the AE so it stays on. I keep getting the passenger drl failure error on my idrive.

I've spent 2 hours trying every setting on carly with no luck.

Any suggestions?

Anyone want to make a quick buck and remote code this for me? I'd really like to get this done today so I can drive my car again I'm not driving around with an AE out.

Thanks in advance for the help guys.

Edit: I am a 2007 build. I wonder if that is the issue? I would rather not have to buy this and upgrade my frm: http://m.ebay.com/itm/like/222127525...99&_mwBanner=1

Dtype · 07-24-2016, 09:50 AM

Are you on frm2? Tell me the power of the angel eyes bulbs/Leds.

Torgus · 07-24-2016, 09:58 AM

What is the quickest way to find out what frm module I have? I did a quick Google search but could not find instructions.

They are dtm style angel eyes from bav auto. I was told to set all led brightness to medium which I did but it did not work. I was told I can try higher as the drivers can take it.

Dtype · 07-24-2016, 10:05 AM

Do you have ncsexpert installed and running on your laptop? I can see and code what you need remotely , but sometimes, when angel eyes have more power than is supposed, it throws an error.

Torgus · 07-24-2016, 10:07 AM

Quote:

Originally Posted by Dtype

Do you have ncsexpert installed and running on your laptop? I can see and code what you need remotely , but sometimes, when angel eyes have more power than is supposed, it throws an error.

No but I can in an instant. Any preference on what version?

Dtype · 07-24-2016, 10:10 AM

You need to install BMW standard tools, and e89 datens at least. There's some threads here in this forum about that.

Dtype · 07-24-2016, 10:14 AM

And do you have cable for coding or just Carly adapter?

Torgus · 07-24-2016, 11:06 AM

Quote:

Originally Posted by Dtype

And do you have cable for coding or just Carly adapter?

just the adapter to use carly with my odb2 port. I figured that was enough...

Dtype · 07-24-2016, 11:21 AM

No. Not for coding with a laptop.

jacie6056 · 07-25-2016, 06:28 AM

how about code to the minima brightest to test it?

dstrickland · 08-03-2016, 06:37 PM

Go into Carly, select the FRM module & find the options that say something about "angel eye voltage monitoring" and "angel eye warning". Turn both of those off.

That should solve your issue.

07-24-2016, 09:31 AM	#1
Torgus Slow. 3800 Rep 7,160 Posts Drives: N54 6466 100% E85 + Meth Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	Can't code new angel eyes with Carly. Help. Remote code me $$$? Got some custom headlights with aftermarket angel eyes. Passenger side angel eye turns off after 10 seconds, driver's side is fine. I have carly but can't seem to get it to code the AE so it stays on. I keep getting the passenger drl failure error on my idrive. I've spent 2 hours trying every setting on carly with no luck. Any suggestions? Anyone want to make a quick buck and remote code this for me? I'd really like to get this done today so I can drive my car again I'm not driving around with an AE out. Thanks in advance for the help guys. Edit: I am a 2007 build. I wonder if that is the issue? I would rather not have to buy this and upgrade my frm: http://m.ebay.com/itm/like/222127525...99&_mwBanner=1 __________________ E92 6466 E85 + Meth/ E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both tuned & retired Psalm 144 Last edited by Torgus; 07-24-2016 at 09:42 AM..
	Appreciate 0 Tweet Quote

07-24-2016, 09:50 AM	#2
Dtype Lieutenant 38 Rep 400 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Are you on frm2? Tell me the power of the angel eyes bulbs/Leds.
	Appreciate 0 Quote

07-24-2016, 09:58 AM	#3
Torgus Slow. 3800 Rep 7,160 Posts Drives: N54 6466 100% E85 + Meth Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	What is the quickest way to find out what frm module I have? I did a quick Google search but could not find instructions. They are dtm style angel eyes from bav auto. I was told to set all led brightness to medium which I did but it did not work. I was told I can try higher as the drivers can take it. __________________ E92 6466 E85 + Meth/ E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both tuned & retired Psalm 144 Last edited by Torgus; 07-24-2016 at 10:05 AM..
	Appreciate 0 Quote

07-24-2016, 10:05 AM	#4
Dtype Lieutenant 38 Rep 400 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Do you have ncsexpert installed and running on your laptop? I can see and code what you need remotely , but sometimes, when angel eyes have more power than is supposed, it throws an error.
	Appreciate 0 Quote

07-24-2016, 10:10 AM	#6
Dtype Lieutenant 38 Rep 400 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	You need to install BMW standard tools, and e89 datens at least. There's some threads here in this forum about that.
	Appreciate 0 Quote

07-24-2016, 10:14 AM	#7
Dtype Lieutenant 38 Rep 400 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	And do you have cable for coding or just Carly adapter?
	Appreciate 0 Quote

07-24-2016, 11:21 AM	#9
Dtype Lieutenant 38 Rep 400 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	No. Not for coding with a laptop.
	Appreciate 0 Quote

07-25-2016, 06:28 AM	#10
jacie6056 Private 0 Rep 78 Posts Drives: 335 Join Date: Aug 2015 Location: CA iTrader: (0)	how about code to the minima brightest to test it?
	Appreciate 0 Quote

08-03-2016, 06:37 PM	#11
dstrickland Banned 332 Rep 325 Posts Drives: BMW 06 325I Join Date: Mar 2016 Location: Atlanta, Ga, USA iTrader: (0)	Go into Carly, select the FRM module & find the options that say something about "angel eye voltage monitoring" and "angel eye warning". Turn both of those off. That should solve your issue.
	Appreciate 1 Quote