700+ lb-ft torque 335is clutch

N54CoupeHP · 08-07-2016, 06:25 PM

Any recommendations for a clutch or clutch kit that can withstand 700+ lb-ft torque? Thanks!

TrAcK TRaP · 08-07-2016, 07:59 PM

Quote:

Originally Posted by N54CoupeHP

Any recommendations for a clutch or clutch kit that can withstand 700+ lb-ft torque? Thanks!

No

jjbmuu · 08-07-2016, 08:09 PM

Curious to know if anyone is rolling around with 600-650 wtq on a single mass/335is clutch set up.

Fundguy1 · 08-07-2016, 08:22 PM

I have the motiv dual disc smfw setup. Works great. Pricey but takes 1000hp without blinking. Slightly heavier and need to feather it a bit longer than oem on starts. Otherwise not much difference. Slight clutch growl in neutral bUT way less than a spec stage 3 I had on my vette.

Chris@VargasTurboTech · 08-07-2016, 08:36 PM

Quote:

Originally Posted by J.J4ck0wsk1

Curious to know if anyone is rolling around with 600-650 wtq on a single mass/335is clutch set up.

I was close to 600 wtq but not 600 wtq in the rpm range that you'd hit in, say, a street race. Mine lasted about 20k miles before starting to slip, daily driven, lots of logs, rolling on the throttle, driven aggressively but not launched. Spec 3+ should hold that fine.

Grand_hustle17 · 08-07-2016, 09:01 PM

Id have to make 700wtq 1st to really recommend

08-07-2016, 06:25 PM	#1
N54CoupeHP Captain 71 Rep 648 Posts Drives: 2012 335is Join Date: Aug 2011 Location: United States iTrader: (0) Garage List 2012 335is [9.66]	700+ lb-ft torque 335is clutch Any recommendations for a clutch or clutch kit that can withstand 700+ lb-ft torque? Thanks! __________________ 2012 E92 335is \| BSM/Coral Red \| Moonroof Delete \| 6MT BQ Tuning \| ar design DPs \| M Performance Spoiler \| Michelin PSS \| Cyba Ram Air \| VRSF CP \| Fuel-It! Stg 2 LPFP Split Armrest \| LUX Reverse Lights \| Rear Fog Lights Enabled TOOK DELIVERY 24 OCT 2011 [FIRST PICS] [INTERIOR PICS]
	Appreciate 0 Tweet Quote

08-07-2016, 08:09 PM	#3
jjbmuu 4ut0strd4 48 Rep 223 Posts Drives: 08 AW E92 335i 6 Speed Join Date: Nov 2011 Location: Florida iTrader: (0)	Curious to know if anyone is rolling around with 600-650 wtq on a single mass/335is clutch set up.
	Appreciate 0 Quote

08-07-2016, 08:22 PM	#4
Fundguy1 Major General 2051 Rep 8,339 Posts Drives: 335 e93 Join Date: Aug 2014 Location: Orlando, fl iTrader: (0)	I have the motiv dual disc smfw setup. Works great. Pricey but takes 1000hp without blinking. Slightly heavier and need to feather it a bit longer than oem on starts. Otherwise not much difference. Slight clutch growl in neutral bUT way less than a spec stage 3 I had on my vette.
	Appreciate 0 Quote

08-07-2016, 09:01 PM	#6
Grand_hustle17 Major 194 Rep 1,173 Posts Drives: E90 335i Join Date: Aug 2015 Location: Maryland iTrader: (0)	Id have to make 700wtq 1st to really recommend
	Appreciate 0 Quote