[Vince@ V K Motorwerks]

Okay so I went out and tried to see what will happen if I push the car and got limp modes several times from 90-100mph. I datalogged one of them Also I noticed that for some strange reason if I did a run from 1st-4th gear no issue, but from 80-100 or 90-100 im getting limps, anyone see anything in the datalog or know anything that I can try?

First data log is limp mode from 90 to 100, the second is 1st to 4th gear, no limp.

[sambonator]

Did you get any codes with the reader?

[Vince@ V K Motorwerks]

Code 0306, Cylinder 6 misfire, I alway have been getting this code its f*ed up, I just paid to have the coils and the plugs changed out and its still does it.

[scalbert]

Can you email me the log files, I want to look at a few things in detail? PM me for the email address.

[zenmaster]

Originally Posted by KenB

humm Shiv said that all the limp problems were solved months ago....

No he didn't.

[scalbert]

Originally Posted by KenB

Again, specific instances should not be lumped into the general group. There was a problem that was remedied. However, until this is uncovered and the problem is resolved, blame should not be placed.

[zenmaster]

Originally Posted by KenB

Shiv wrote that last week in response to the particular limp issue with "SOME v2.01 and early versions of v2.0.2". This does not mean ALL limp issues were fixed. And it does not mean "months ago". Obviously, it wasn't until 12/24 that the boost control fix came out that addressed the limp mode.

[Driver72]

Originally Posted by KenB

This is another one of my personal favorite quotes

Looks like a cut and pasted post from Shiv.
Even on his website with v2 he doesn't list the 335i as doing "well under" 4 seconds 0-60 even with DR's.

And how do you know Chitown's limp has anything to do with the PROcede??

The code said cylinder 6 misfire.

If you are here just to start crap and post useless posts and comments, move on, nothing good comes of it.

[sambonator]

Maybe you can try reducing the plug gap on cylinder 6 to see if it resolves it.

[E90Boy]

I'm also getting something similar. From about 75-80ish I go from 6th to 3rd gear and gun it, limp mode. This happened twice so far in about two months time. When I'm in 3rd and going to almost 6800rpm limp mode. If I go down to about 60ish and in 3rd gear and shift at about 6500rpm everything is fine. I really hope the next map fix this because the 2 times that I got into limp mode I was going against a 350z and a clk500, both blew by me

[Vince@ V K Motorwerks]

I have returned the car to stock and I havent had any issues, however, With V2 I do get the same code. Shiv has been trying to help me but I think my issue is unique. I didnt start this thread to have people talk shit about Shiv or anyone else, im looking for ideas or hearing from someone who know what is happening to give me a solution. If your here to bash or just write shit that has no relavence please dont post here and find something more constructive to do with your time. Thanks.

[scalbert]

Originally Posted by Chitown335i

I have returned the car to stock and I havent had any issues, however, With V2 I do get the same code.

Is it fully back to stock or are the bypass plugs in?

[Vince@ V K Motorwerks]

Originally Posted by scalbert

Is it fully back to stock or are the bypass plugs in?

with the Bypass plugs I dont have any issues, with the procede connected i get limp mode. strange thing is if i live it in 3rd gear and let the car shift on its own, i get limp mode when I pull from 80-100 or 90-100. 60-100 I dont get limp modes.

[XxLancaxX]

hey vince if you have time today swing by I'll be outside putting the h pill upgrade in my car , we can take a look at yours. Never seen a procede before

[Vince@ V K Motorwerks]

Originally Posted by XxLancaxX

hey vince if you have time today swing by I'll be outside putting the h pill upgrade in my car , we can take a look at yours. Never seen a procede before

Sounds good dude, Ill call you in a few, what time are you free?

[Driver72]

Originally Posted by KenB

http://www.e90post.com/forums/showth...t=89208&page=2

check post #44

He must of been clearly drunk that day.

[scalbert]

Originally Posted by Chitown335i

with the Bypass plugs I dont have any issues, with the procede connected i get limp mode. strange thing is if i live it in 3rd gear and let the car shift on its own, i get limp mode when I pull from 80-100 or 90-100. 60-100 I dont get limp modes.

I would still love to check out the plots in depth.