[The Nightman]

Originally Posted by Greyfox

Honestly if you want something cheap and quick for jacking at the pads, find a piece of steel 1" or 1 1/4" square heavy tube or solid square stock and cut a piece 2.5" long.

This is what I do. The square tube sticks out enough and I place my jackstand perpendicular to it.

Also, I have not issues reaching the front jack point with the HF aluminum jack + puck. The rear is a little more tricky because of how far in the jack point is.

[Greyfox]

Originally Posted by FamilyManTrackSedan

I just don't like the way the HF jack stand meets the pad edges (or the block within) at two teensy contact points of 0.003". I'd like a big rubber pad to meet atop a good surface area.

I don't use the steel blocks with jack stands. Only my jack when I'm switching out tires or working on one corner.

[Needbmwpartzz]

Easy peasy just get the grinder out with a cut-off wheel an have at er......