Trying to bleed ABS but can't access DSC on my E60

DJtoad · 12-11-2012, 05:11 PM

I haven't had any luck getting responses on any of the other coding forums so I'm going to try my luck here even though I have an E60.

I've done some trivial coding on my 2010 535i (enabling digital speedometer and turning off bulb checks on my LED angel eyes) but have now run into a problem. I'm trying to access the DSC module so that I can bleed my ABS system. When I select "Chassis" from INPA I see three DSC-related selections:

Dynamic Stability Control
Dynamic Stability Control E60M5
Dynamic Stability Control E60-16 From ... (can't read the rest)

When I try to select either the first or last I get an error saying it detected DSC_60PP instead. I'm not sure what to do since I don't see that one in the list; however, I do see DSC_60PP.prg listed in the ECU directory. I'm currently running INPA 5.0.2 and have the V45 files installed (sgdat, ecu, daten, cfgdat). I've tried earlier versions of the E60 files as well without success. Any ideas on how I can access the DSC_60PP module?

12-11-2012, 07:03 PM

Try updating your ediabas to 7.2 and inpa to 5.06 and try to get 47.1 daten if they exist for your e60

AWTT335i · 02-09-2014, 11:55 AM

Ever find a solution to this? I'm having the same issue.

thakid22 · 08-29-2015, 10:04 AM

Strange, I have the same issue and error message as the Original Poster.
2010 535i Sport

Cannot Acccess DSC or ARS modules in INPA

My daten files are 53.3 and I have the latest Ediabas. What's going on here?
Anyone have any ideas?

matteblue3er · 08-31-2015, 03:32 PM

Incorrect scripts

christoepurrr · 09-30-2016, 09:47 PM

Was there a solution to this ? Just came across this exact same problem today.

thakid22 · 10-02-2016, 06:06 PM

Quote:

Originally Posted by christoepurrr

Was there a solution to this ? Just came across this exact same problem today.

Dsc60pp does not seem to be available in INPA, so you cannot access the DSC Premium module on the 2008+ E60.

However, I installed Rheingold and it works just fine to access and activate DSC functions.
The brake bleeding procedure is a snap!

All of the necessary files seem to be there in INPA, but it is configured incorrectly, giving those errors and preventing access.

12-11-2012, 05:11 PM	#1
DJtoad Captain 60 Rep 665 Posts Drives: 2010 535i M Sport Join Date: May 2008 Location: Ellicott City, MD iTrader: (2)	Trying to bleed ABS but can't access DSC on my E60 I haven't had any luck getting responses on any of the other coding forums so I'm going to try my luck here even though I have an E60. I've done some trivial coding on my 2010 535i (enabling digital speedometer and turning off bulb checks on my LED angel eyes) but have now run into a problem. I'm trying to access the DSC module so that I can bleed my ABS system. When I select "Chassis" from INPA I see three DSC-related selections: Dynamic Stability Control Dynamic Stability Control E60M5 Dynamic Stability Control E60-16 From ... (can't read the rest) When I try to select either the first or last I get an error saying it detected DSC_60PP instead. I'm not sure what to do since I don't see that one in the list; however, I do see DSC_60PP.prg listed in the ECU directory. I'm currently running INPA 5.0.2 and have the V45 files installed (sgdat, ecu, daten, cfgdat). I've tried earlier versions of the E60 files as well without success. Any ideas on how I can access the DSC_60PP module? __________________ 2010 535i M Sport - Platinum Gray/Dakota Black/Anthracite Bamboo 2016 Jaguar F-Type S AWD - Polar White/Cirrus
	Appreciate 0 Tweet Quote

12-11-2012, 07:03 PM	#2
rich123321 Guest 0 Rep n/a Posts Drives:	Try updating your ediabas to 7.2 and inpa to 5.06 and try to get 47.1 daten if they exist for your e60
	Appreciate 0 Quote

02-09-2014, 11:55 AM	#3
AWTT335i First Lieutenant 12 Rep 368 Posts Drives: E90 M3 Join Date: Aug 2013 Location: United states iTrader: (0)	Ever find a solution to this? I'm having the same issue.
	Appreciate 0 Quote

08-29-2015, 10:04 AM	#4
thakid22 Captain 292 Rep 600 Posts Drives: 2021 Bmw M340i M-Sport w/ VDC Join Date: May 2013 Location: Little Rock iTrader: (0)	Strange, I have the same issue and error message as the Original Poster. 2010 535i Sport Cannot Acccess DSC or ARS modules in INPA My daten files are 53.3 and I have the latest Ediabas. What's going on here? Anyone have any ideas?
	Appreciate 0 Quote

08-31-2015, 03:32 PM	#5
matteblue3er Captain 241 Rep 949 Posts Drives: Racecar Join Date: Jul 2015 Location: Philly iTrader: (0)	Incorrect scripts
	Appreciate 0 Quote

09-30-2016, 09:47 PM	#6
christoepurrr Lieutenant 160 Rep 446 Posts Drives: BMW M3 Join Date: May 2015 Location: So. Cal iTrader: (2)	Was there a solution to this ? Just came across this exact same problem today.
	Appreciate 0 Quote