|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Front M-Sport Conversion
|
|
10-21-2016, 02:08 PM | #1 |
Lieutenant
508
Rep 497
Posts |
Front M-Sport Conversion
My bumper got crunched by a parked hit and run this week, so looking into converting the front of my car into M-Sport. What is the minimum needed for this conversion? I have front PDC, but have seen someone squeeze them into the bumper. LCI sedan.
|
10-24-2016, 04:42 PM | #2 |
Private First Class
10
Rep 143
Posts |
I have an e92 and just did this. I found a used bumper in my color local. But I looked every day for a couple months to find it. Then I got lucky and someone here was selling the kit to swap from non m sport to sport. But you are supposed to get a new engine shield, inner fenders, all the brake and oil cooler intakes, the bumper, the bumper mesh inserts(expensive), headlight washer covers, new tow hook cover(uses different shape then non m sport), and I think that was about it, other than many extra fasteners and screws. Good luck. It's very expensive and it will take a very long time if you aren't willing to drop +$1K to do it all new and at once.
__________________
My ride: 11' e92 335i. N55. Dp. Jb4. M-sport front bumper conversion. CF bits. More to come
|
Appreciate
0
|
10-24-2016, 04:45 PM | #3 |
Private First Class
10
Rep 143
Posts |
Almost forgot, I found a plastic adapter on real oem, to attach your non m sport engine shield to the m sport bumper. Be careful using it however, there is then an inch space between the edge of your bumper and the shield where you can catch your bumper and tear it off on a concrete parking barrier
__________________
My ride: 11' e92 335i. N55. Dp. Jb4. M-sport front bumper conversion. CF bits. More to come
|
Appreciate
0
|
Bookmarks |
|
|