New Battery 2008 335xi

jwebb335xi · 12-20-2016, 07:54 PM

Hey guys,

I apologize if this issue has been covered before, but I'm stuck. I have a 2008 335xi. I purchased a new Interstate MTP H7/94R, which replaces the same model, which an indy installed 4 years ago.

Since then, I have gotten INPA working in order to code injectors. So, I looked at the IBS section in INPA and learned that my first replacement batter was NEVER coded in and, to make matters worse, the car believes I've had a 90 Ah battery since the car was built 9 years ago. The MTP H7/94 I have sitting in my garage that interstate provided me under the warranty program is an 80 Ah battery.

I plan to do the physical install tonight and "register" the battery through INPA as well. BUT, I can't see where/how to let the car know I actually have an 80 Ah battery... I really haven't used NSC expert, or any other programs and don't know where to turn.

I thought about getting DIS or Carly just for this purpose, which is still cheaper than having to pay someone to change that setting.

Any advice?

Thanks in advance!

ctuna · 12-20-2016, 08:46 PM

do a search here
there are some very large threads on coding a battery .
They involve some of the other programs associated with
Inpa not inpa itself.

http://www.e90post.com/forums/showth...hlight=battery

go directly to entry 36 or read the whole thread before trying it .

12-20-2016, 07:54 PM	#1
jwebb335xi Major 205 Rep 1,070 Posts Drives: 2008 335 XI Join Date: Jun 2014 Location: Chicago Burbs iTrader: (0)	New Battery 2008 335xi - Interstate MTP H7/94R Hey guys, I apologize if this issue has been covered before, but I'm stuck. I have a 2008 335xi. I purchased a new Interstate MTP H7/94R, which replaces the same model, which an indy installed 4 years ago. Since then, I have gotten INPA working in order to code injectors. So, I looked at the IBS section in INPA and learned that my first replacement batter was NEVER coded in and, to make matters worse, the car believes I've had a 90 Ah battery since the car was built 9 years ago. The MTP H7/94 I have sitting in my garage that interstate provided me under the warranty program is an 80 Ah battery. I plan to do the physical install tonight and "register" the battery through INPA as well. BUT, I can't see where/how to let the car know I actually have an 80 Ah battery... I really haven't used NSC expert, or any other programs and don't know where to turn. I thought about getting DIS or Carly just for this purpose, which is still cheaper than having to pay someone to change that setting. Any advice? Thanks in advance! __________________ JWebb335xi MHD / Wedge / 93 Octane/ xHP / FMIC / Inlets / Catted DPs / CP / DVs
	Appreciate 0 Tweet Quote

12-20-2016, 08:46 PM	#2
ctuna Lieutenant General 2064 Rep 13,400 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	do a search here there are some very large threads on coding a battery . They involve some of the other programs associated with Inpa not inpa itself. http://www.e90post.com/forums/showth...hlight=battery go directly to entry 36 or read the whole thread before trying it . Last edited by ctuna; 12-20-2016 at 08:55 PM..
	Appreciate 0 Quote