|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
New HPA E9x 3 and M Series Rear Ride Height Adjuster
|
 |
| 09-01-2011, 04:26 PM | #1 |
|
Supreme Allied Commander
 
4033
Rep 55,500
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
New HPA E9x 3 and M Series Rear Ride Height Adjuster
A pair of adjustable height rear spring platforms, designed to work with 60mm inner diameter coilover rear springs mounted in the stock spring location at the rear of a BMW E8x (1 series) or E9x (3 and M series). These are high quality products made by HPA right here in the USA, with easy adjustments. The thread used is self locking once any load is applied.
The material for the rest of the assembly is made up of black and HPA blue anodized aircraft grade aluminum alloy. These can be adjusted from a minimum of 0.5" thick to a maximum of 2.75" thick. These can be adjusted independently of each other and is great for corner balancing of your BMW. This particular model has been optimized to run at the top of the spring on the back of a BMW E8x/E9x. The locating stub fits in the factory location and replaces the bulky factory locating stub/hat, which inhibits ride height adjustment with other similar rear ride height adjusters. Great for those with lower than ideal rear ride height with aftermarket coil overs systems. These height adjusters will work with 60 and 65 mm ID springs and is popular with the KW V series owners looking for more ride height using KW's 61 mm springs as well. Order yours here: http://www.hpashop.com/product.sc?pr...categoryId=238 $200 Last edited by HP Autosport; 02-13-2013 at 05:41 PM.. |
|
|
| 10-24-2011, 06:55 PM | #2 |
|
Supreme Allied Commander
4033
Rep 55,500
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Height adjusters
These adjusters are good in stock!
If you have KW V series that are riding too low on the back, these will give you an additional 1" of ride height. |
|
Appreciate
0
|
| 11-15-2011, 03:04 AM | #3 |
|
Private
 2
Rep 65
Posts
Drives: 2018 BMW M3 CS
Join Date: May 2011
Location: Vancouver
|
My 328xi is lowered with H&R sport springs on stock shocks. Can I use these to raise my rear height??
__________________
 |
|
Appreciate
0
|
| 01-30-2015, 02:25 PM | #5 |
|
GoofBall
54
Rep 1,055
Posts |
These let you use a higher rate spring, as most are lowering not all of us want to lose the height. These let you keep a set ride height but allow you to have a stiffer spring, win win!
|
|
Appreciate
0
|
 |
| Bookmarks |
|
|
